Share via


az network express-route peering

Manage ExpressRoute peering of an ExpressRoute circuit.

Commands

Name Description Type Status
az network express-route peering connection

Manage ExpressRoute circuit connections.

Core GA
az network express-route peering connection create

Create connections between two ExpressRoute circuits.

Core GA
az network express-route peering connection delete

Delete the specified Express Route Circuit Connection from the specified express route circuit.

Core GA
az network express-route peering connection ipv6-config

Manage ExpressRoute circuit connection configs.

Core GA
az network express-route peering connection ipv6-config remove

Remove connection config to ExpressRoute circuit connection.

Core GA
az network express-route peering connection ipv6-config set

Set connection config to ExpressRoute circuit connection.

Core GA
az network express-route peering connection ipv6-config wait

Place the CLI in a waiting state until a condition is met.

Core GA
az network express-route peering connection list

List all global reach connections associated with a private peering in an express route circuit.

Core GA
az network express-route peering connection show

Get the specified Express Route Circuit Connection from the specified express route circuit.

Core GA
az network express-route peering connection wait

Place the CLI in a waiting state until a condition is met.

Core GA
az network express-route peering create

Create peering settings for an ExpressRoute circuit.

Core GA
az network express-route peering delete

Delete peering settings.

Core GA
az network express-route peering get-stats

Get all traffic stats of an ExpressRoute peering.

Core Preview
az network express-route peering list

List peering settings of an ExpressRoute circuit.

Core GA
az network express-route peering peer-connection

Manage ExpressRoute circuit peer connections.

Core Preview
az network express-route peering peer-connection list

Gets all global reach peer connections associated with a private peering in an express route circuit.

Core Preview
az network express-route peering peer-connection show

Get the specified Peer Express Route Circuit Connection from the specified express route circuit.

Core Preview
az network express-route peering show

Get the details of an express route peering.

Core GA
az network express-route peering update

Update peering settings of an ExpressRoute circuit.

Core GA
az network express-route peering wait

Place the CLI in a waiting state until a condition is met.

Core GA

az network express-route peering create

Create peering settings for an ExpressRoute circuit.

az network express-route peering create --circuit-name
                                        --resource-group
                                        [--advertised-public-prefixes]
                                        [--customer-asn]
                                        [--ip-version]
                                        [--legacy-mode]
                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--peer-asn]
                                        [--peering-type {AzurePrivatePeering, AzurePublicPeering, MicrosoftPeering}]
                                        [--primary-peer-subnet]
                                        [--route-filter]
                                        [--routing-registry-name {AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC}]
                                        [--secondary-peer-subnet]
                                        [--shared-key]
                                        [--vlan-id]

Examples

Create Microsoft Peering settings with IPv4 configuration.

az network express-route peering create -g MyResourceGroup --circuit-name MyCircuit --peering-type MicrosoftPeering --peer-asn 10002 --vlan-id 103 --primary-peer-subnet 101.0.0.0/30 --secondary-peer-subnet 102.0.0.0/30 --advertised-public-prefixes 101.0.0.0/30

Create Microsoft Peering settings with IPv6 configuration.

az network express-route peering create -g MyResourceGroup --circuit-name MyCircuit --peering-type AzurePrivatePeering --peer-asn 10002 --vlan-id 103 --ip-version ipv6 --primary-peer-subnet 2002:db00::/126 --secondary-peer-subnet 2003:db00::/126

Create peering settings for an ExpressRoute circuit. (autogenerated)

az network express-route peering create --circuit-name MyCircuit --peer-asn 10002 --peering-type AzurePublicPeering --primary-peer-subnet 101.0.0.0/30 --resource-group MyResourceGroup --secondary-peer-subnet 102.0.0.0/30 --shared-key Abc123 --vlan-id 103

Required Parameters

--circuit-name

ExpressRoute circuit name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--advertised-public-prefixes

Space-separated list of prefixes to be advertised through the BGP peering. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--customer-asn

Autonomous system number of the customer.

--ip-version

The IP version to update Microsoft Peering settings for. Allowed values: IPv4, IPv6. Default: IPv4.

Default value: IPv4
--legacy-mode

Integer representing the legacy mode of the peering.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--peer-asn

Autonomous system number of the customer/connectivity provider.

--peering-type

BGP peering type for the circuit. Allowed values: AzurePrivatePeering, AzurePublicPeering, MicrosoftPeering.

Accepted values: AzurePrivatePeering, AzurePublicPeering, MicrosoftPeering
--primary-peer-subnet

/30(ipv4) or /126(ipv6) subnet used to configure IP addresses for primary interface.

--route-filter

Name or ID of a route filter to apply to the peering settings.

--routing-registry-name

Internet Routing Registry / Regional Internet Registry. Allowed values: AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC.

Accepted values: AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC
--secondary-peer-subnet

/30(ipv4) or /126(ipv6) subnet used to configure IP addresses for secondary interface.

--shared-key

Key for generating an MD5 for the BGP session.

--vlan-id

Identifier used to identify the customer.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network express-route peering delete

Delete peering settings.

az network express-route peering delete [--circuit-name]
                                        [--ids]
                                        [--name]
                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--resource-group]
                                        [--subscription]

Examples

Delete private peering.

az network express-route peering delete -g MyResourceGroup --circuit-name MyCircuit -n AzurePrivatePeering

Optional Parameters

--circuit-name

ExpressRoute circuit name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the peering.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network express-route peering get-stats

Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Get all traffic stats of an ExpressRoute peering.

az network express-route peering get-stats [--circuit-name]
                                           [--ids]
                                           [--name]
                                           [--resource-group]
                                           [--subscription]

Examples

Get ExpressRoute Circuit Peering Traffic Stats

az network express-route peering get-stats --circuit-name MyCircuit --name MyPeering --resource-group MyResourceGroup

Optional Parameters

--circuit-name

ExpressRoute circuit name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the peering.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network express-route peering list

List peering settings of an ExpressRoute circuit.

az network express-route peering list --circuit-name
                                      --resource-group
                                      [--max-items]
                                      [--next-token]

Examples

List peering settings of an ExpressRoute circuit.

az network express-route peering list -g MyResourceGroup --circuit-name MyCircuit

Required Parameters

--circuit-name

ExpressRoute circuit name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network express-route peering show

Get the details of an express route peering.

az network express-route peering show [--circuit-name]
                                      [--ids]
                                      [--name]
                                      [--resource-group]
                                      [--subscription]

Examples

Get private peering details of an ExpressRoute circuit.

az network express-route peering show -g MyResourceGroup --circuit-name MyCircuit -n AzurePrivatePeering

Optional Parameters

--circuit-name

ExpressRoute circuit name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the peering.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network express-route peering update

Update peering settings of an ExpressRoute circuit.

az network express-route peering update [--add]
                                        [--advertised-public-prefixes]
                                        [--circuit-name]
                                        [--customer-asn]
                                        [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--ids]
                                        [--ip-version]
                                        [--legacy-mode]
                                        [--name]
                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                        [--peer-asn]
                                        [--primary-peer-subnet]
                                        [--remove]
                                        [--resource-group]
                                        [--route-filter]
                                        [--routing-registry-name {AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC}]
                                        [--secondary-peer-subnet]
                                        [--set]
                                        [--shared-key]
                                        [--subscription]
                                        [--vlan-id]

Examples

Add IPv6 Microsoft Peering settings to existing IPv4 config.

az network express-route peering update -g MyResourceGroup --circuit-name MyCircuit --ip-version ipv6 --primary-peer-subnet 2002:db00::/126 --secondary-peer-subnet 2003:db00::/126 --advertised-public-prefixes 2002:db00::/126

Update peering settings of an ExpressRoute circuit. (autogenerated)

az network express-route peering update --circuit-name MyCircuit --name MyPeering --peer-asn 10002 --primary-peer-subnet 2002:db00::/126 --resource-group MyResourceGroup --secondary-peer-subnet 2003:db00::/126 --shared-key Abc123 --vlan-id 103

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

--advertised-public-prefixes

Space-separated list of prefixes to be advertised through the BGP peering. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--circuit-name

ExpressRoute circuit name.

--customer-asn

Autonomous system number of the customer.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--ip-version

The IP version to update Microsoft Peering settings for. Allowed values: IPv4, IPv6. Default: IPv4.

Default value: IPv4
--legacy-mode

Integer representing the legacy mode of the peering.

--name -n

The name of the peering.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--peer-asn

Autonomous system number of the customer/connectivity provider.

--primary-peer-subnet

/30(ipv4) or /126(ipv6) subnet used to configure IP addresses for primary interface.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--route-filter

Name or ID of a route filter to apply to the peering settings.

--routing-registry-name

Internet Routing Registry / Regional Internet Registry. Allowed values: AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC.

Accepted values: AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC
--secondary-peer-subnet

/30(ipv4) or /126(ipv6) subnet used to configure IP addresses for secondary interface.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

--shared-key

Key for generating an MD5 for the BGP session.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--vlan-id

Identifier used to identify the customer.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network express-route peering wait

Place the CLI in a waiting state until a condition is met.

az network express-route peering wait [--circuit-name]
                                      [--created]
                                      [--custom]
                                      [--deleted]
                                      [--exists]
                                      [--ids]
                                      [--interval]
                                      [--name]
                                      [--resource-group]
                                      [--subscription]
                                      [--timeout]
                                      [--updated]

Optional Parameters

--circuit-name

ExpressRoute circuit name.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--name -n

The name of the peering.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.