Практическое руководство. Отмена задачи и ее дочерних элементов

Статья
04/09/2024

В этом примере показано, как выполнить следующие задачи:

Создание и запуск задачи с возможностью отмены.
Передача маркера отмены пользовательскому делегату, и дополнительно — экземпляру задачи.
Перехват запросов на отмену и реагирование на них в пользовательском делегате.
Опциональное оповещение вызывающего потока об отмене задачи.

Вызывающий поток не может принудительно завершить задачу. Он только передает ей запрос на отмену. Если задача уже выполняется, то именно пользовательский делегат получает такой запрос и принимает соответствующие меры. Если запрос на отмену поступает до запуска задачи, пользовательский делегат даже не выполняется и объект задачи сразу переходит в состояние Canceled (Отменено).

Пример

В этом примере показано, как завершить операцию Task и ее дочерние элементы в ответ на запрос отмены. Здесь также показано, что при завершении пользовательского делегата путем создания исключения TaskCanceledException вызывающий поток может дополнительно использовать метод Wait или метод WaitAll для ожидания завершения задач. В этом случае необходимо использовать блок try/catch для обработки исключений в вызывающем потоке.

using System;
using System.Collections.Concurrent;
using System.Threading;
using System.Threading.Tasks;

public class Example
{
    public static async Task Main()
    {
        // Cancellation token source for cancellation. Make sure to dispose after use (which is done here through the using expression).
        using var tokenSource = new CancellationTokenSource();

        // The cancellation token will be used to communicate cancellation to tasks
        var token = tokenSource.Token;

        Console.WriteLine("Main: Press any key to begin tasks...");
        Console.ReadKey(true);
        Console.WriteLine("Main: To terminate the example, press 'c' to cancel and exit...");
        Console.WriteLine();

        // Store references to the tasks so that we can wait on them and
        // observe their status after cancellation.
        var tasks = new ConcurrentBag<Task>();

        // Pass the token to the user delegate so it can cancel during execution,
        // and also to the task so it can cancel before execution starts.
        var cancellableTask = Task.Run(() => {
            DoSomeWork(token);
            Console.WriteLine("Cancellable: Task {0} ran to completion", Task.CurrentId);
        }, token);
        Console.WriteLine("Main: Cancellable Task {0} created", cancellableTask.Id);
        tasks.Add(cancellableTask);

        var parentTask = Task.Run(() =>
        {
            for (int i = 0; i <= 7; i++)
            {
                // If cancellation was requested we don't need to start any more
                // child tasks (that would immediately cancel) => break out of loop
                if (token.IsCancellationRequested) break;

                // For each child task, pass the same token
                // to each user delegate and to Task.Run.
                var childTask = Task.Run(() => {
                    DoSomeWork(token);
                    Console.WriteLine("Child: Task {0} ran to completion", Task.CurrentId);
                }, token);
                Console.WriteLine("Parent: Task {0} created", childTask.Id);
                tasks.Add(childTask);

                DoSomeWork(token, maxIterations: 1);
            }

            Console.WriteLine("Parent: Task {0} ran to completion", Task.CurrentId);
        }, token);
        Console.WriteLine("Main: Parent Task {0} created", parentTask.Id);
        tasks.Add(parentTask);

        // Request cancellation from the UI thread.
        char ch = Console.ReadKey().KeyChar;
        if (ch == 'c' || ch == 'C')
        {
            tokenSource.Cancel();
            Console.WriteLine("\nMain: Task cancellation requested.");

            // Optional: Observe the change in the Status property on the task.
            // It is not necessary to wait on tasks that have canceled. However,
            // if you do wait, you must enclose the call in a try-catch block to
            // catch the OperationCanceledExceptions that are thrown. If you do
            // not wait, no exception is thrown if the token that was passed to the
            // Task.Run method is the same token that requested the cancellation.
        }

        try
        {
            // Wait for all tasks before disposing the cancellation token source
            await Task.WhenAll(tasks);
        }
        catch (OperationCanceledException)
        {
            Console.WriteLine($"\nMain: {nameof(OperationCanceledException)} thrown\n");
        }

        // Display status of all tasks.
        foreach (var task in tasks)
        {
            Console.WriteLine("Main: Task {0} status is now {1}", task.Id, task.Status);
        }
    }

    static void DoSomeWork(CancellationToken ct, int maxIterations = 10)
    {
        // Was cancellation already requested?
        if (ct.IsCancellationRequested)
        {
            Console.WriteLine("Task {0} was cancelled before it got started.", Task.CurrentId);
            ct.ThrowIfCancellationRequested();
        }

        // NOTE!!! A "TaskCanceledException was unhandled
        // by user code" error will be raised here if "Just My Code"
        // is enabled on your computer. On Express editions JMC is
        // enabled and cannot be disabled. The exception is benign.
        // Just press F5 to continue executing your code.
        for (int i = 0; i <= maxIterations; i++)
        {
            // Do a bit of work. Not too much.
            var sw = new SpinWait();
            for (int j = 0; j <= 100; j++)
                sw.SpinOnce();

            if (ct.IsCancellationRequested)
            {
                Console.WriteLine("Task {0} work cancelled", Task.CurrentId);
                ct.ThrowIfCancellationRequested();
            }
        }
    }
}
// The example displays output like the following:
//    Main: Press any key to begin tasks...
//    Main: To terminate the example, press 'c' to cancel and exit...
//
//    Main: Cancellable Task 13 created
//    Main: Parent Task 14 created
//    Parent: Task 15 created
//    Parent: Task 16 created
//    Parent: Task 17 created
//    Parent: Task 18 created
//    Parent: Task 19 created
//    Parent: Task 20 created
//    Cancellable: Task 13 ran to completion
//    Child: Task 15 ran to completion
//    Parent: Task 21 created
//    Child: Task 16 ran to completion
//    Parent: Task 22 created
//    Child: Task 17 ran to completion
//    c
//    Main: Task cancellation requested.
//    Task 20 work cancelled
//    Task 21 work cancelled
//    Task 22 work cancelled
//    Task 18 work cancelled
//    Task 14 work cancelled
//    Task 19 work cancelled
//
//    Main: OperationCanceledException thrown
//
//    Main: Task 22 status is now Canceled
//    Main: Task 21 status is now Canceled
//    Main: Task 20 status is now Canceled
//    Main: Task 19 status is now Canceled
//    Main: Task 18 status is now Canceled
//    Main: Task 17 status is now RanToCompletion
//    Main: Task 16 status is now RanToCompletion
//    Main: Task 15 status is now RanToCompletion
//    Main: Task 14 status is now Canceled
//    Main: Task 13 status is now RanToCompletion

Imports System.Collections.Concurrent
Imports System.Threading
Imports System.Threading.Tasks

Module Example
    Sub Main()
        Dim tokenSource As New CancellationTokenSource()
        Dim token As CancellationToken = tokenSource.Token

        ' Store references to the tasks so that we can wait on them and
        ' observe their status after cancellation.
        Dim t As Task
        Dim tasks As New ConcurrentBag(Of Task)()

        Console.WriteLine("Press any key to begin tasks...")
        Console.ReadKey(True)
        Console.WriteLine("To terminate the example, press 'c' to cancel and exit...")
        Console.WriteLine()

        ' Request cancellation of a single task when the token source is canceled.
        ' Pass the token to the user delegate, and also to the task so it can
        ' handle the exception correctly.
        t = Task.Factory.StartNew(Sub() DoSomeWork(token), token)
        Console.WriteLine("Task {0} executing", t.Id)
        tasks.Add(t)

        ' Request cancellation of a task and its children. Note the token is passed
        ' to (1) the user delegate and (2) as the second argument to StartNew, so
        ' that the task instance can correctly handle the OperationCanceledException.
        t = Task.Factory.StartNew(Sub()
                                      ' Create some cancelable child tasks.
                                      Dim tc As Task
                                      For i As Integer = 3 To 10
                                          ' For each child task, pass the same token
                                          ' to each user delegate and to StartNew.
                                          tc = Task.Factory.StartNew(Sub(iteration) DoSomeWork(token), i, token)
                                          Console.WriteLine("Task {0} executing", tc.Id)
                                          tasks.Add(tc)
                                          ' Pass the same token again to do work on the parent task.
                                          ' All will be signaled by the call to tokenSource.Cancel below.
                                          DoSomeWork(token)
                                      Next
                                  End Sub,
                                  token)

        Console.WriteLine("Task {0} executing", t.Id)
        tasks.Add(t)

        ' Request cancellation from the UI thread.
        Dim ch As Char = Console.ReadKey().KeyChar
        If ch = "c"c Or ch = "C"c Then
            tokenSource.Cancel()
            Console.WriteLine(vbCrLf + "Task cancellation requested.")

            ' Optional: Observe the change in the Status property on the task.
            ' It is not necessary to wait on tasks that have canceled. However,
            ' if you do wait, you must enclose the call in a try-catch block to
            ' catch the OperationCanceledExceptions that are thrown. If you do
            ' not wait, no exception is thrown if the token that was passed to the
            ' StartNew method is the same token that requested the cancellation.
        End If

        Try
            Task.WaitAll(tasks.ToArray())
        Catch e As AggregateException
            Console.WriteLine()
            Console.WriteLine("AggregateException thrown with the following inner exceptions:")
            ' Display information about each exception.
            For Each v In e.InnerExceptions
                If TypeOf v Is OperationCanceledException Then
                    Console.WriteLine("   The operation was canceled.")
                Else
                    Console.WriteLine("   Exception: {0}", v.GetType().Name)
                End If
            Next
            Console.WriteLine()
        Finally
            tokenSource.Dispose()
        End Try

        ' Display status of all tasks.
        For Each t In tasks
            Console.WriteLine("Task {0} status is now {1}", t.Id, t.Status)
        Next
    End Sub

    Sub DoSomeWork(ByVal ct As CancellationToken)
        ' Was cancellation already requested?
        If ct.IsCancellationRequested = True Then
            Console.WriteLine("Task {0} was cancelled before it got started.",
                              Task.CurrentId)
            ct.ThrowIfCancellationRequested()
        End If

        Dim maxIterations As Integer = 100

        ' NOTE!!! A "TaskCanceledException was unhandled
        ' by user code" error will be raised here if "Just My Code"
        ' is enabled on your computer. On Express editions JMC is
        ' enabled and cannot be disabled. The exception is benign.
        ' Just press F5 to continue executing your code.
        For i As Integer = 0 To maxIterations
            ' Do a bit of work. Not too much.
            Dim sw As New SpinWait()
            For j As Integer = 0 To 100
                sw.SpinOnce()
            Next
            If ct.IsCancellationRequested Then
                Console.WriteLine("Task {0} cancelled", Task.CurrentId)
                ct.ThrowIfCancellationRequested()
            End If
        Next
    End Sub
End Module
' The example displays output like the following:
'    Press any key to begin tasks...
'    To terminate the example, press 'c' to cancel and exit...
'
'    Task 1 executing
'    Task 2 executing
'    Task 3 executing
'    Task 4 executing
'    Task 5 executing
'    Task 6 executing
'    Task 7 executing
'    Task 8 executing
'    c
'    Task cancellation requested.
'    Task 2 cancelled
'    Task 7 cancelled
'
'    AggregateException thrown with the following inner exceptions:
'       TaskCanceledException: Task 2
'       TaskCanceledException: Task 8
'       TaskCanceledException: Task 7
'
'    Task 2 status is now Canceled
'    Task 1 status is now RanToCompletion
'    Task 8 status is now Canceled
'    Task 7 status is now Canceled
'    Task 6 status is now RanToCompletion
'    Task 5 status is now RanToCompletion
'    Task 4 status is now RanToCompletion
'    Task 3 status is now RanToCompletion

Класс System.Threading.Tasks.Task полностью интегрирован с моделью отмены, основанной на типах System.Threading.CancellationTokenSource и System.Threading.CancellationToken. Дополнительные сведения см. в статьях Отмена в управляемых потоках и Отмена задач.

Поделиться через

Практическое руководство. Отмена задачи и ее дочерних элементов

Пример

См. также

Дополнительные ресурсы