ServiceBehaviorAttribute.TransactionIsolationLevel Свойство

public:
 property System::Transactions::IsolationLevel TransactionIsolationLevel { System::Transactions::IsolationLevel get(); void set(System::Transactions::IsolationLevel value); };

public System.Transactions.IsolationLevel TransactionIsolationLevel { get; set; }

member this.TransactionIsolationLevel : System.Transactions.IsolationLevel with get, set

Public Property TransactionIsolationLevel As IsolationLevel

Значение свойства

IsolationLevel Значение, указывающее уровень изоляции транзакций. Значение по умолчанию — Unspecified.

Исключения

Примеры

В следующем примере кода устанавливается уровень ReadCommittedизоляции транзакций , не поддерживает одновременные транзакции, требуется потоковая транзакция из вызова метода и автоматически фиксирует транзакцию, если необработанное исключение не возникает.

using System;
using System.ServiceModel;
using System.Transactions;

namespace Microsoft.WCF.Documentation
{
  [ServiceContract(
    Namespace="http://microsoft.wcf.documentation",
    SessionMode=SessionMode.Required)]
  public interface IBehaviorService
  {
    [OperationContract]
    string TxWork(string message);
  }

  // Note: To use the TransactionIsolationLevel property, you
  // must add a reference to the System.Transactions.dll assembly.
  /* The following service implementation:
   *   -- Processes messages on one thread at a time
   *   -- Creates one service object per session
   *   -- Does not release the service object when the transaction commits
   *   -- The isolation level is read committed.
   */
  [ServiceBehavior(
    ConcurrencyMode=ConcurrencyMode.Single,
    InstanceContextMode=InstanceContextMode.PerSession,
    ReleaseServiceInstanceOnTransactionComplete=false,
    TransactionIsolationLevel=System.Transactions.IsolationLevel.ReadCommitted
  )]
  public class BehaviorService : IBehaviorService, IDisposable
  {
    Guid myID;

    public BehaviorService()
    {
      myID = Guid.NewGuid();
      Console.WriteLine(
        "Object "
        + myID.ToString()
        + " created.");
    }

    /*
     * The following operation-level behaviors are specified:
     *   -- Always executes under a transaction scope.
     *   -- The transaction scope is completed when the operation terminates
     *       without an unhandled exception.
     */
    [OperationBehavior(
      TransactionAutoComplete = true,
      TransactionScopeRequired = true
    )]
    [TransactionFlow(TransactionFlowOption.Mandatory)]
    public string TxWork(string message)
    {
      // Do some transactable work.
      Console.WriteLine("TxWork called with: " + message);
      // Display transaction information.

      TransactionInformation info = Transaction.Current.TransactionInformation;
      Console.WriteLine("The distributed tx ID: {0}.", info.DistributedIdentifier);
      Console.WriteLine("The tx status: {0}.", info.Status);
      return string.Format("Hello. This was object {0}.",myID.ToString()) ;
    }

    public void Dispose()
    {
      Console.WriteLine(
        "Service "
        + myID.ToString()
        + " is being recycled."
      );
    }
  }
}

Imports System.ServiceModel
Imports System.Transactions

Namespace Microsoft.WCF.Documentation
  <ServiceContract(Namespace:="http://microsoft.wcf.documentation", SessionMode:=SessionMode.Required)> _
  Public Interface IBehaviorService
    <OperationContract> _
    Function TxWork(ByVal message As String) As String
  End Interface

  ' Note: To use the TransactionIsolationLevel property, you 
  ' must add a reference to the System.Transactions.dll assembly.
'   The following service implementation:
'   *   -- Processes messages on one thread at a time
'   *   -- Creates one service object per session
'   *   -- Does not release the service object when the transaction commits
'   *   -- The isolation level is read committed.
'   
    <ServiceBehavior(ConcurrencyMode:=ConcurrencyMode.Single, InstanceContextMode:=InstanceContextMode.PerSession, _
      ReleaseServiceInstanceOnTransactionComplete:=False, TransactionIsolationLevel:=System.Transactions.IsolationLevel.ReadCommitted)> _
    Public Class BehaviorService
        Implements IBehaviorService, IDisposable
        Private myID As Guid

        Public Sub New()
            myID = Guid.NewGuid()
            Console.WriteLine("Object " & myID.ToString() & " created.")
        End Sub

        '    
        '     * The following operation-level behaviors are specified:
        '     *   -- Always executes under a transaction scope.
        '     *   -- The transaction scope is completed when the operation terminates
        '     *       without an unhandled exception.
        '     
        <OperationBehavior(TransactionAutoComplete:=True, TransactionScopeRequired:=True), TransactionFlow(TransactionFlowOption.Mandatory)> _
        Public Function TxWork(ByVal message As String) As String Implements IBehaviorService.TxWork
            ' Do some transactable work.
            Console.WriteLine("TxWork called with: " & message)
            ' Display transaction information.

            Dim info As TransactionInformation = Transaction.Current.TransactionInformation
            Console.WriteLine("The distributed tx ID: {0}.", info.DistributedIdentifier)
            Console.WriteLine("The tx status: {0}.", info.Status)
            Return String.Format("Hello. This was object {0}.", myID.ToString())
        End Function

        Public Sub Dispose() Implements IDisposable.Dispose
            Console.WriteLine("Service " & myID.ToString() & " is being recycled.")
        End Sub
    End Class
End Namespace

Базовая привязка должна поддерживать потоки транзакций для правильного выполнения следующего примера кода. Для поддержки потоковой транзакции, WSHttpBindingнапример, задайте TransactionFlow свойство true в коде или в файле конфигурации приложения. В следующем примере кода показан файл конфигурации для предыдущего примера.

<configuration>
  <system.serviceModel>
    <services>
      <service  
        name="Microsoft.WCF.Documentation.BehaviorService" 
        behaviorConfiguration="mex"
        >
        <host>
          <baseAddresses>
            <add baseAddress="http://localhost:8080/BehaviorService"/>
            <add baseAddress="net.tcp://localhost:8081/BehaviorService"/>
          </baseAddresses>
        </host>
        <!--
          Note:
            This example code uses the WSHttpBinding to support transactions using the 
            WS-AtomicTransactions (WS-AT) protocol. WSHttpBinding is configured to use the  
            protocol, but the protocol is not enabled on some computers. Use the xws_reg -wsat+ 
            command to enable the WS-AtomicTransactions protocol in the MSDTC service.          
          -->
        <endpoint 
           contract="Microsoft.WCF.Documentation.IBehaviorService"
           binding="wsHttpBinding"
           bindingConfiguration="wsHttpBindingWithTXFlow"
           address="http://localhost:8080/BehaviorService"
          />
        <endpoint 
               contract="Microsoft.WCF.Documentation.IBehaviorService"
               binding="netTcpBinding"
               bindingConfiguration="netTcpBindingWithTXFlow"
               address="net.tcp://localhost:8081/BehaviorService"
          />
      </service>
    </services>
    <behaviors>
      <serviceBehaviors>
        <behavior name="mex">
          <serviceMetadata httpGetEnabled="true"/>
        </behavior>
      </serviceBehaviors>
    </behaviors>
    <!-- binding configuration - configures a WSHttpBinding to require transaction flow -->
    <bindings>
      <wsHttpBinding>
        <binding name="wsHttpBindingWithTXFlow" transactionFlow="true" />
      </wsHttpBinding>
      <netTcpBinding>
        <binding name="netTcpBindingWithTXFlow" transactionFlow="true" />
      </netTcpBinding>
    </bindings>

  </system.serviceModel>
</configuration>

Комментарии

Уровень изоляции, в котором выполняется транзакция, определяет, как данные обрабатываются при внесении изменений в другие транзакции и как долго транзакция должна хранить блокировки для защиты от этих изменений. Например, значение Unspecifiedпо умолчанию указывает, что обновление или вставка не может произойти до завершения транзакции.

Это свойство также можно использовать для ограничения уровня изоляции входящих транзакций, поступающих от клиента.