DF - Sleep with IO During (Reliability)
This test cycles the system through various sleep states and performs I/O on devices.
- Test binary: Devfund_Sleep_With_IO_During.dll
- Test method: Sleep_With_IO_During
Test details
| Specifications |
|
| Platforms |
|
| Supported Releases |
|
| Expected run time (in minutes) | 45 |
| Category | Scenario |
| Timeout (in minutes) | 150 |
| Requires reboot | false |
| Requires special configuration | true |
| Type | automatic |
Additional documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):
Running the test
Before you run the test, complete the test setup as described in the test requirements: Device.Fundamentals Reliability Testing Prerequisites.
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.
For troubleshooting information specific to the Device Fundamentals tests in the HLK and WDK, see Device.DevFund additional documentation.
More information
Parameters
| Parameter name | Parameter description |
|---|---|
| DQ | A WDTF SDEL query that is used to identify the target device(s) - https://go.microsoft.com/fwlink/?LinkId=232678 |
| Wpa2PskAesSsid | Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter. The default is 'kitstestssid'. |
| Wpa2PskPassword | Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide password of the WPA2 AES WiFi network specified using the Wpa2PskAesSsid parameter. The default is 'password'. |
| TestCycles | Number of test cycles |
| ResumeDelay | Delay time in seconds after each sleep cycle |
| IOPeriod | IO period in minutes |
| MultiDeviceHardwareIdSdelQueryHardwareID | Multi Device SDEL |
| MultiDeviceInstanceIdSdelWDKDeviceID | Device id of DUT |
| WDTFREMOTESYSTEM | Required ONLY if DUT or any of its child devices is a wired NIC that does not have an IPv6 gateway address. If determined to be required, please provide an IPv6 address that the NIC can ping to test network I/O. Eg: fe80::78b6:810:9c12:46cd |
| DriverVerifierAdditionalDrivers | Additional drivers that should have Driver Verifier enabled |
| DriverVerifierExcludedFlags | Placeholder for Driver Verifier flags that may be manually excluded for the test run |
| DriverVerifierCustomizeConfiguration | Specifies that this test may want to automatically update Driver Verifier settings |