DXVA_MBctrl_I_OffHostIDCT_1 structure (dxva.h)
The DXVA_MBctrl_I_OffHostIDCT_1 structure is sent once per macroblock by the host decoder to the accelerator to specify macroblock control commands for 4:2:0 intra pictures when using off-host IDCT.
Syntax
typedef struct _DXVA_MBctrl_I_OffHostIDCT_1 {
WORD wMBaddress;
WORD wMBtype;
DWORD dwMB_SNL;
WORD wPatternCode;
BYTE bNumCoef[DXVA_NumBlocksPerMB_420];
} DXVA_MBctrl_I_OffHostIDCT_1;
Members
wMBaddress
Specifies the macroblock address of the current macroblock in raster scan order. For examples of macroblock addresses see macroblock addresses.
wMBtype
Specifies the type of macroblock being processed. The following bits define macroblock processing.
| Bits | Description |
|---|---|
| 15 to 12 | MvertFieldSel_3 (bit 15, the most significant bit) through MvertFieldSel_0 (bit 12) Must be zero. |
| 11 | Reserved Bit Must be zero. |
| 10 | HostResidDiff Specifies whether spatial-domain residual difference decoded blocks are sent or whether transform coefficients are sent for off-host IDCT for the current macroblock. The HostResidDiff flag is always equal to zero in this structure. This flag must be zero if bConfigResidDiffHost is zero. This flag must be 1 if bConfigResidDiffAccelerator is zero. The bConfigResidDiffHost and bConfigResidDiffAccelerator members are contained in the DXVA_ConfigPictureDecode structure. |
| 9 and 8 | MotionType This does not apply to intra pictures. Both bits must be zero. |
| 7 and 6 | MBscanMethod Specifies the scan method of the macroblock control command. This must be equal to bPicScanMethod if bPicScanFixed is 1. If bConfigHostInverseScan is zero, MBscanMethod is one of the following values:
|
| 5 | FieldResidual Indicates whether the residual difference blocks use a field IDCT structure as specified in MPEG-2. Must be 1 if the bPicStructure member of DXVA_PictureParameters is 1 or 2. When used for MPEG-2, FieldResidual must be zero if the frame_pred_frame_DCT flag in the MPEG-2 syntax is 1, and must be equal to the dct_type element of the MPEG-2 syntax if dct_type is present for the macroblock. |
| 4 | H261LoopFilter Must be zero. |
| 3 | Motion4MV Must be zero. |
| 2 | MotionBackward Must be zero. |
| 1 | MotionForward Must be zero. |
| 0 | IntraMacroblock Must be 1. |
dwMB_SNL
wPatternCode
Indicates whether residual difference data is sent for each block in the macroblock. In an intra picture, residual difference data is sent for every block in the macroblock. The bits in wPatternCode that refer to all blocks of the current macroblock must be 1 in DXVA_MBctrl_I_OffHostIDCT_1.
Bit (11-i) of wPatternCode (where bit 0 is the least significant bit) indicates whether residual difference data is sent for block i, where i is the index of the block within the macroblock as specified in MPEG-2 figures 6-10, 6-11, and 6-12 (raster scan order for Y, followed by 4:2:0 blocks of Cb in raster scan order, followed by 4:2:0 blocks of Cr, followed by 4:2:2 blocks of Cb, followed by 4:2:2 blocks of Cr, followed by 4:4:4 blocks of Cb, followed by 4:4:4 blocks of Cr). The data for the coded blocks (those blocks having bit (11-i) equal to 1) is found in the residual coding buffer in the same indexing order (increasing i). For 4:2:0 MPEG-2 data, the value of wPatternCode corresponds to shifting the decoded value of CBP (coded block pattern) to the left by six bit positions (those lower-bit positions being used for 4:2:2 and 4:4:4 chroma formats).
bNumCoef[DXVA_NumBlocksPerMB_420]
Each value in the bNumCoef array indicates the number of coefficients in the residual difference data buffer for each block i of the macroblock.
The array subscript i is the index of the block within the macroblock as specified in MPEG-2 video Figures 6-10, 6-11, and 6-12 (raster-scan order for Y, followed by Cb, followed by Cr).
This member is used only when the HostResidDiff flag (bit 10 in wMBtype) is zero, and bChromaFormat is 1 (4:2:0). If used in 4:2:2 or 4:4:4 formats, it would increase the size of typical macroblock control commands past a critical memory alignment boundary. As a result, the TCoefEOB bit within the DXVA_TCoefSingle structure is used for determining the number of coefficients in each block in non-4:2:0 cases.
The purpose of bNumCoef is to indicate the quantity of data present for each block in the residual difference data buffer, expressed as the number of coefficients present. When the bConfig4GroupedCoefs member of the DXVA_ConfigPictureDecode structure is 1, bNumCoef may contain either the actual number of coefficients sent for the block or that value rounded up to be a multiple of four. The data for these coefficients is found in the residual difference buffer in the same order.
Remarks
Skipped macroblocks are not used by intra pictures, so the MBskipsFollowing variable must be zero. The MBdataLocation variable must be zero for the first macroblock in the macroblock control command buffer. For more information about how skipped macroblocks are generated, see Generating Skipped Macroblocks.
Requirements
| Requirement | Value |
|---|---|
| Header | dxva.h (include Dxva.h) |