Find and delete email messages in eDiscovery (preview)

You can use the search feature to search for and delete email messages from all mailboxes in your organization. This process can help you find and remove potentially harmful or high-risk email, such as:

• Messages that contain dangerous attachments or viruses
• Phishing messages
• Messages that contain sensitive data

Before you begin

• The search and purge workflow described in this article doesn't delete chat messages or other content from Microsoft Teams. If the search that you create in Step 2 returns items from Microsoft Teams, those items aren't deleted when you purge items in Step 3. To search for and delete chat messages, see Search and purge chat messages in Teams.

• To create and run a search, you have to be a member of the eDiscovery Manager role group or be assigned the Compliance Search role in the Microsoft Purview portal. To delete messages, you have to be a member of the Organization Management role group or be assigned the Search And Purge role in the Microsoft Purview portal For information about adding users to a role group, see Assign eDiscovery permissions.

  Note

  The Organization Management role group exists in both Exchange Online and in the Microsoft Purview portal. These are separate role groups that give different permissions. Being a member of Organization Management in Exchange Online does not grant the required permissions to delete email messages. If you aren't assigned the Search And Purge role in the Microsoft Purview portal (either directly or through a role group such as Organization Management), you'll receive an error in Step 3 when you run the New-ComplianceSearchAction cmdlet with the message "A parameter cannot be found that matches parameter name 'Purge'".

• You have to use Security & Compliance PowerShell to delete messages. See Step 1: Connect to Security & Compliance PowerShell for instructions about how to connect.

• A maximum of 10 items per mailbox can be removed at one time. Because the capability to search for and remove messages is intended to be an incident-response tool, this limit helps ensure that messages are quickly removed from mailboxes. This feature isn't intended to clean up user mailboxes.

• If additional items need to be removed from the mailbox, additional steps are required.

  1. Single item retention must be disabled for the mailboxes. This ensures items are removed from the Purges folder
  2. The Managed Folder Assistant must be run against the mailbox after each compliance purge action. This action permanently deletes items and allow an additional 10 items to be removed with additional purge actions.

  Note

  This option isn't supported if a mailbox has a litigation hold. Only 10 items are removed from view of the user. These 10 items aren't permanently deleted, so these 10 items are the only ones processed.

• The maximum number of mailboxes in a content search that you can use to delete items by doing a search and purge action is 50,000. If the search (that you create in Step 2) searches more than 50,000 mailboxes, the purge action (that you create in Step 3) will fail. Searching more than 50,000 mailbox in a single search might typically happen when you configure the search to include all mailboxes in your organization. This restriction still applies even when less than 50,000 mailboxes contain items that match the search query. See the More information section for guidance about using search permissions filters to search for and purge items from more than 50,000 mailboxes.

• The procedure in this article can only be used to delete items in Exchange Online mailboxes and public folders. You can't use it to delete content from SharePoint or OneDrive sites.

• Email items in a review set in an eDiscovery case can't be deleted by using the procedures in this article. That's because items in a review set are stored in an Azure Storage location, and not in the live service. This means they won't be returned by the content search that you create in Step 1. To delete items in a review set, you have to delete the eDiscovery case that contains the review set.

Step 1: Connect to Security & Compliance PowerShell

The first step is to connect to Security & Compliance PowerShell for your organization. For step-by-step instructions, see Connect to Security & Compliance PowerShell.

Step 2: Create a search query to find the message to delete

The second step is to create and run a search to find the message that you want to remove from mailboxes in your organization. You can create the search by using the Microsoft Purview portal or by running the New-ComplianceSearch and Start-ComplianceSearch cmdlets in Security & Compliance PowerShell. The messages that match the query for this search will be deleted by running the New-ComplianceSearchAction -Purge command in Step 3. For information about creating and configuring search queries, see the following articles:

• Create a search query
• Use the condition builder
• New-ComplianceSearch
• Start-ComplianceSearch

Tips for finding messages to remove

The goal of the search query is to narrow the results of the search to only the message or messages that you want to remove. Here are some tips:

• If you know the exact text or phrase used in the subject line of the message, use the Subject property in the search query.
• If you know that exact date (or date range) of the message, include the Received property in the search query.
• If you know who sent the message, include the From property in the search query.
• Preview the search results to verify that the search returned only the message (or messages) that you want to delete.
• Use the search estimate statistics (displayed in the details pane of the search in the Microsoft Purview portal or by using the Get-ComplianceSearch cmdlet) to get a count of the total number of results.

Here are two examples of queries to find suspicious email messages.

• This query returns messages that were received by users between April 13, 2024 and April 14, 2024 and that contain the words "action" and "required" in the subject line.

  (Received:4/13/2024..4/14/2024) AND (Subject:'Action required')
  

• This query returns messages that were sent by [email protected] and that contain the exact phrase "Update your account information" in the subject line.

  (From:[email protected]) AND (Subject:"Update your account information")
  

Here's an example of using a query to create and start a search by running the New-ComplianceSearch and Start-ComplianceSearch cmdlets to search all mailboxes in the organization:

$Search=New-ComplianceSearch -Name "Remove Phishing Message" -ExchangeLocation All -ContentMatchQuery '(Received:4/13/2016..4/14/2016) AND (Subject:"Action required")'
Start-ComplianceSearch -Identity $Search.Identity

Step 3: Delete the message

After you've created and refined a search query to return the messages that you want to remove, the final step is to run the New-ComplianceSearchAction -Purge command in Security & Compliance PowerShell to delete the message.

You can soft- or hard-delete the message. A soft-deleted message is moved to a user's Recoverable Items folder and retained until the deleted item retention period expires. Hard-deleted messages are marked for permanent removal from the mailbox and is permanently removed the next time the mailbox is processed by the Managed Folder Assistant. If single item recovery is enabled for the mailbox, hard-deleted items are permanently removed after the deleted item retention period expires. If a mailbox is placed on hold, deleted messages are preserved until the hold duration for the item expires or until the hold is removed from the mailbox.

To run the following commands to delete messages, be sure that you're connected to Security & Compliance PowerShell.

Soft-delete messages

In the following example, the command soft-deletes the search results returned by a search query named "Remove Phishing Message".

New-ComplianceSearchAction -SearchName "Remove Phishing Message" -Purge -PurgeType SoftDelete

Hard-delete messages

To hard-delete the items returned by the "Remove Phishing Message" content search, you would run this command:

New-ComplianceSearchAction -SearchName "Remove Phishing Message" -Purge -PurgeType HardDelete

When you run the previous commands to soft- or hard-delete messages, the search specified by the SearchName parameter is the search query that you created in Step 1.

For more information, see New-ComplianceSearchAction.

More information

• How do you get status on the search and remove operation?

  Run the Get-ComplianceSearchAction to get the status on the delete operation. The object that is created when you run the New-ComplianceSearchAction cmdlet is named using this format: <name of Content Search>_Purge.

• What happens after you delete a message?

  A message that's deleted with the New-ComplianceSearchAction -Purge -PurgeType HardDelete command is moved to the Purges folder and can't be accessed by the user. After the message is moved to the Purges folder, the message is retained for the deleted item retention period if single item recovery is enabled for the mailbox. (In Microsoft 365, single item recovery is enabled by default when a new mailbox is created.) After the deleted item retention period expires, the message is marked for permanent deletion and is purged from Microsoft 365 the next time the mailbox is processed by the Managed Folder assistant.

  If you use the New-ComplianceSearchAction -Purge -PurgeType SoftDelete command, messages are moved to the Deletions folder in the user's Recoverable Items folder. It isn't immediately purged from Microsoft 365. The user can recover messages in the Deleted Items folder for the duration based on the deleted item retention period configured for the mailbox. After this retention period expires (or if user purges the message before it expires), the message is moved to the Purges folder and can no longer be accessed by the user. Once in the Purges folder, the message is retained for the duration based on the deleted item retention period configured for the mailbox if single items recovery is enabled for the mailbox. (In Microsoft 365, single item recovery is enabled by default when a new mailbox is created.) After the deleted item retention period expires, the message is marked for permanent deletion and will be purged from Microsoft 365 the next time that the mailbox is processed by the Managed Folder assistant.

• What if you have to delete a message from more than 50,000 mailboxes?

  You can perform a search and purge operation on a maximum of 50,000 mailboxes (even if less than 50,000 contain items that match the search query). If you have to do a search and purge operation on more than 50,000 mailboxes, consider creating temporary search permissions filters that reduce the number of mailboxes that would be searched to less than 50,000 mailboxes. For example, if your organization contains mailboxes in different departments, states, or countries/regions, you can create a mailbox search permissions filter based on one of those mailbox properties to search a subset of mailboxes in your organization. After you create the search permissions filter, you would create the search (described in Step 1) and then delete the message (described in Step 3). Then you can edit the filter to search for and purge messages in a different set of mailboxes. For more information about creating search permissions filters, see Configure search permissions filtering in eDiscovery (preview).

• Will unindexed items included in the search results be deleted?

  No, the `New-ComplianceSearchAction -Purge command doesn't delete unindexed items.

• What happens if a message is deleted from a mailbox that has been placed on Litigation Hold or is assigned to an Microsoft 365 retention policy?

  After the message is purged and moved to the Purges folder, the message is retained until the hold duration expires. If the hold duration is unlimited, then items are retained until the hold is removed or the hold duration is changed.

• Why is the search and remove workflow divided among different Microsoft Purview portal role groups?

  A person has to be a member of the eDiscovery Manager role group or be assigned the Compliance Search management role to search mailboxes. To delete messages, a person has to be a member of the Organization Management role group or be assigned the Search And Purge management role. This makes it possible to control who can search mailboxes in the organization and who can delete messages.