New-InboxRule

The AlwaysDeleteOutlookRulesBlob switch hides a warning message when you use Outlook on the web (formerly known as Outlook Web App) or Exchange PowerShell to modify Inbox rules. You don't need to specify a value with this switch.

The ApplyCategory parameter specifies an action for the Inbox rule that applies the specified category to messages. A valid value is any text value that you want to define as a category. You can specify multiple categories separated by commas. If the value contains spaces, enclose the value in quotation marks (").

The categories that you specify for this parameter are defined in the mailbox (they aren't shared between mailboxes).

The ApplySystemCategory parameter specifies an action for the Inbox rule that applies the specified system category to messages. System categories are available to all mailboxes in the organization. Valid values are:

• NotDefined
• Bills
• Document
• DocumentPlus
• Event
• Family
• File
• Flight
• FromContact
• Important
• LiveView
• Lodging
• MailingList
• Newsletter
• Photo
• Purchase
• RentalCar
• RestaurantReservation
• RetiredPromotion
• ShippingNotification
• Shopping
• SocialUpdate
• Travel
• Video

You can specify multiple values separated by commas.

The BodyContainsWords parameter specifies a condition for the Inbox rule that looks for the specified words or phrases in the body of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding exception parameter to this condition is ExceptIfBodyContainsWords.

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

• Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
• Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

The CopyToFolder parameter specifies an action for the Inbox rule that copies messages to the specified mailbox folder. The syntax is MailboxID:\ParentFolder[\SubFolder].

For the value of MailboxID, you can use any value that uniquely identifies the mailbox. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Domain\Username
• Email address
• GUID
• LegacyExchangeDN
• SamAccountName
• User ID or user principal name (UPN)

Example values for this parameter are [email protected]:\Marketing or John:\Inbox\Reports.

The DeleteMessage parameter specifies an action for the Inbox rule that sends messages to the Deleted Items folder. Valid values are:

• $true: Messages that match the conditions of the rule are moved to the Deleted Items folder.
• $false: The action isn't used.

The DeleteSystemCategory parameter specifies an action for the Inbox rule that deletes the specified system category from messages. System categories are available to all mailboxes in the organization. Valid values are:

• NotDefined
• Bills
• Document
• DocumentPlus
• Event
• Family
• File
• Flight
• FromContact
• Important
• LiveView
• Lodging
• MailingList
• Newsletter
• Photo
• Purchase
• RentalCar
• RestaurantReservation
• RetiredPromotion
• ShippingNotification
• Shopping
• SocialUpdate
• Travel
• Video

You can specify multiple values separated by commas.

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

The ExceptIfBodyContainsWords parameter specifies an exception for the Inbox rule that looks for the specified words or phrases in the body of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding condition parameter to this exception is BodyContainsWords.

The ExceptIfFlaggedForAction parameter specifies an exception for the Inbox rule that looks messages with the specified message flag. Valid values are:

• Any
• Call
• DoNotForward
• FollowUp
• ForYourInformation
• Forward
• NoResponseNecessary
• Read
• Reply
• ReplyToAll
• Review

The corresponding condition parameter to this exception is FlaggedForAction.

The ExceptIfFrom parameter specifies an exception for the Inbox rule that looks for the specified sender in messages. You can use any value that uniquely identifies the sender. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

The corresponding condition parameter to this exception is From.

The ExceptIfFromAddressContainsWords parameter specifies an exception for the Inbox rule that looks for messages where the specified words are in the sender's email address.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding condition parameter to this exception is FromAddressContainsWords.

The ExceptIfHasAttachment parameter specifies an exception for the Inbox rule that looks for messages with attachments. Valid values are:

• $true: The rule action isn't applied to messages that have attachments.
• $false: The exception isn't used.

The corresponding condition parameter to this exception is HasAttachment.

The ExceptIfHasClassification parameter specifies an exception for the Inbox rule that looks for messages with the specified message classification. You can find message classifications by using the Get-MessageClassification cmdlet. You can specify multiple message classifications separated by commas.

The corresponding condition parameter to this exception is HasClassification.

The HeaderContainsWords parameter specifies an exception for the Inbox rule that looks for the specified words or phrases in the header fields of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding condition parameter to this exception is HeaderContainsWords.

The ExceptIfMessageTypeMatches parameter specifies an exception for the Inbox rule that looks for messages of the specified type. Valid values are:

• AutomaticReply
• AutomaticForward
• Encrypted
• Calendaring
• CalendaringResponse
• PermissionControlled
• Voicemail
• Signed
• ApprovalRequest
• ReadReceipt
• NonDeliveryReport

The corresponding condition parameter to this exception is MessageTypeMatches.

The ExceptIfMyNameInCcBox parameter specifies an exception for the Inbox rule that looks for messages where the mailbox owner is in the Cc field. Valid values are:

• $true: The rule action isn't applied to messages where the mailbox owner is in the Cc field.
• $false: The exception isn't used.

The corresponding condition parameter to this exception is MyNameInCcBox.

The ExceptIfMyNameInToBox parameter specifies an exception for the Inbox rule that looks for messages where the mailbox owner is in the To field. Valid values are:

• $true: The rule action isn't applied to messages where the mailbox owner is in the To field.
• $false: The exception isn't used.

The corresponding condition parameter to this exception is MyNameInToBox.

The ExceptIfMyNameInToOrCcBox parameter specifies an exception for the Inbox rule that looks for messages where the mailbox owner is in the To or Cc fields Valid values are.

• $true: The rule action isn't applied to messages where the mailbox owner is in the To or Cc fields.
• $false: The exception isn't used.

The corresponding condition parameter to this exception is MyNameInToOrCcBox.

The ExceptIfMyNameNotInToBox parameter specifies an exception for the Inbox rule that looks for messages where the mailbox owner isn't in the To field. Valid values are:

• $true: The rule action isn't applied to messages where the mailbox owner isn't in the To field.
• $false: The exception isn't used.

The corresponding condition parameter to this exception is MyNameNotInToBox.

The ExceptIfReceivedAfterDate parameter specifies an exception for the Inbox rule that looks for messages received after the specified date.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

The corresponding condition parameter to this exception is ReceivedAfterDate.

The ExceptIfReceivedBeforeDate parameter specifies an exception for the Inbox rule that looks for messages received before the specified date.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

The corresponding condition parameter to this exception is ReceivedBeforeDate.

The ExceptIfRecipientAddressContainsWords parameter specifies an exception for the Inbox rule that looks for messages where the specified words are in recipient email addresses.

You can specify multiple values separated by commas. The maximum length of this parameter is 255 characters.

The corresponding condition parameter to this exception is RecipientAddressContainsWords.

The ExceptIfSentOnlyToMe parameter specifies an exception for the Inbox rule that looks for messages where the only recipient is the mailbox owner. Valid values are:

• $true: The rule action isn't applied to messages where the mailbox owner is the only recipient.
• $false: The exception isn't used.

The corresponding condition parameter to this exception is SentOnlyToMe.

The ExceptIfSentTo parameter specifies an exception that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

The corresponding condition parameter to this exception is SentTo.

The ExceptIfSubjectContainsWords parameter specifies an exception for the Inbox rule that looks for the specified words or phrases in the Subject field of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding condition parameter to this exception is SubjectContainsWords.

The ExceptIfSubjectOrBodyContainsWords parameter specifies an exception for the Inbox rule that looks for the specified words or phrases in the Subject field or body of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding condition parameter to this exception is SubjectOrBodyContainsWords.

The ExceptIfWithImportance parameter specifies an exception for the Inbox rule that looks for messages with the specified importance level. Valid values are:

• High
• Normal
• Low

The corresponding condition parameter to this exception is WithImportance.

The ExceptIfWithinSizeRangeMaximum parameter specifies part of an exception for the Inbox rule that looks for messages that smaller than specified maximum size.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

You need to use this parameter with the ExceptIfWithinSizeRangeMinimum parameter, and the value of this parameter must be greater than the value of ExceptIfWithinSizeRangeMinimum.

The corresponding condition parameter to this exception is WithinSizeRangeMaximum.

The ExceptIfWithinSizeRangeMinimum parameter specifies part of an exception for the Inbox rule that looks for messages that are larger than the specified minimum size.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

You need to use this parameter with the ExceptIfWithinSizeRangeMaximum parameter, and the value of this parameter must be less than the value of ExceptIfWithinSizeRangeMaximum.

The corresponding condition parameter to this exception is WithinSizeRangeMinimum.

The ExceptIfWithSensitivity parameter specifies an exception for the Inbox rule that looks for messages with the specified sensitivity level. Valid values are:

• Normal
• Personal
• Private
• CompanyConfidential

The corresponding condition parameter to this exception is WithSensitivity.

The FlaggedForAction parameter specifies a condition for the Inbox rule that looks for messages with the specified message flag. Valid values are:

• Any
• Call
• DoNotForward
• FollowUp
• ForYourInformation
• Forward
• NoResponseNecessary
• Read
• Reply
• ReplyToAll
• Review

The Force switch hides warning or confirmation messages. You don't need to specify a value with this switch.

A confirmation prompt warns you if the mailbox contains rules that were created by Outlook, because any client-side rules will be removed by the actions of this cmdlet.

The ForwardAsAttachmentTo parameter specifies an action for the Inbox rule that forwards the message to the specified recipient as an attachment. You can use any value that uniquely identifies the recipient. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

The ForwardTo parameter specifies an action for the Inbox rule that forwards the message to the specified recipient. You can use any value that uniquely identifies the recipient. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

The From parameter specifies a condition for the Inbox rule that looks for the specified sender in messages. You can use any value that uniquely identifies the sender. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

The corresponding exception parameter to this condition is ExceptIfFrom.

The FromAddressContainsWords parameter specifies a condition for the Inbox rule that looks for messages where the specified words are in the sender's email address.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding exception parameter to this condition is ExceptIfFromAddressContainsWords.

The FromMessageId parameter specifies the message that's used to create the Inbox rule. The rule is based on the properties of the message. You identify the message by its Base64-encoded StoreObjectId property value. For example:

• MailboxId\StoreObjectId
• StoreObjectId

When you use this parameter to create an Inbox rule, the following message properties are used in the rule:

• Subject: The message subject is added to the SubjectContainsWords condition.
• From: The message sender is added to the From condition.
• To and Cc: Recipients in the To and Cc fields are added to the SentTo condition.

The HasAttachment parameter specifies a condition for the Inbox rule that looks for messages with attachments. Valid values are:

• $true: The rule action is applied to messages that have attachments.
• $false: The condition isn't used.

The corresponding exception parameter to this condition is ExceptIfHasAttachment.

The HasClassification parameter specifies a condition for the Inbox rule that looks for messages with the specified message classification. You can find message classifications by using the Get-MessageClassification cmdlet. You can specify multiple message classifications separated by commas.

The corresponding exception parameter to this condition is ExceptIfHasClassification.

The HeaderContainsWords parameter specifies a condition for the Inbox rule that looks for the specified words or phrases in the header fields of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding exception parameter to this condition is ExceptIfHeaderContainsWords.

The Mailbox parameter specifies the mailbox that contains the Inbox rule. You can use any value that uniquely identifies the mailbox. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Domain\Username
• Email address
• GUID
• LegacyExchangeDN
• SamAccountName
• User ID or user principal name (UPN)

The MarkAsRead parameter specifies an action for the Inbox rule that marks messages as read. Valid values are:

• $true: Messages that match the conditions of the rule are marked as read.
• $false: The action isn't used.

The MarkImportance parameter specifies an action for the Inbox rule that marks messages with the specified importance flag. Valid values are:

• Low
• Normal
• High

The MessageTypeMatches parameter specifies a condition for the Inbox rule that looks for messages of the specified type. Valid values are:

• AutomaticReply
• AutomaticForward
• Encrypted
• Calendaring
• CalendaringResponse
• PermissionControlled
• Voicemail
• Signed
• ApprovalRequest
• ReadReceipt
• NonDeliveryReport

The corresponding exception parameter to this condition is ExceptIfMessageTypeMatches.

The MoveToFolder parameter specifies an action for the Inbox rule that moves messages to the specified mailbox folder. The syntax is MailboxID:\ParentFolder[\SubFolder].

For the value of MailboxID, you can use any value that uniquely identifies the mailbox. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Domain\Username
• Email address
• GUID
• LegacyExchangeDN
• SamAccountName
• User ID or user principal name (UPN)

Example values for this parameter are [email protected]:\Marketing or John:\Inbox\Reports.

The MyNameInCcBox parameter specifies a condition for the Inbox rule that looks for messages where the mailbox owner is in the Cc field. Valid values are:

• $true: The rule action is applied to messages where the mailbox owner is in the Cc field.
• $false: The condition isn't used.

The corresponding exception parameter to this condition is ExceptIfMyNameInCcBox.

The MyNameInToBox parameter specifies a condition for the Inbox rule that looks for messages where the mailbox owner is in the To field. Valid values are:

• $true: The rule action is applied to messages where the mailbox owner is in the To field.
• $false: The condition isn't used.

The corresponding exception parameter to this condition is ExceptIfMyNameInToBox.

The MyNameInToOrCcBox parameter specifies a condition for the Inbox rule that looks for messages where the mailbox owner is in the To or Cc fields Valid values are.

• $true: The rule action is applied to messages where the mailbox owner is in the To or Cc fields.
• $false: The condition isn't used.

The corresponding exception parameter to this condition is ExceptIfMyNameInToOrCcBox.

The MyNameNotInToBox parameter specifies a condition for the Inbox rule that looks for messages where the mailbox owner isn't in the To field. Valid values are:

• $true: The rule action is applied to messages where the mailbox owner isn't in the To field.
• $false: The condition isn't used.

The corresponding exception parameter to this condition is ExceptIfMyNameNotInToBox.

The Name parameter specifies the name of the Inbox rule. The maximum length is 512 characters. If the value contains spaces, enclose the value in quotation marks (").

The PinMessage parameter specifies an action for the Inbox rule that pins messages to the top of the Inbox. Valid values are:

• $true: Message that match the conditions of the rule are pinned to the top of the Inbox.
• $false: The action isn't used.

The Priority parameter specifies a priority for the Inbox rule that determines the order of rule processing. A lower integer value indicates a higher priority,

The ReceivedAfterDate parameter specifies a condition for the Inbox rule that looks for messages received after the specified date.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

The corresponding exception parameter to this condition is ExceptIfReceivedAfterDate.

The ReceivedBeforeDate parameter specifies a condition for the Inbox rule that looks for messages received before the specified date.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

The corresponding exception parameter to this condition is ExceptIfReceivedBeforeDate.

The RecipientAddressContainsWords parameter specifies a condition for the Inbox rule that looks for messages where the specified words are in recipient email addresses.

You can specify multiple values separated by commas. The maximum length of this parameter is 255 characters.

The corresponding exception parameter to this condition is ExceptIfRecipientAddressContainsWords.

The RedirectTo parameter specifies an action for the Inbox rule that redirects the message to the specified recipient. You can use any value that uniquely identifies the recipient. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

This parameter is available only in on-premises Exchange.

The SendTextMessageNotificationTo parameter specifies an action for the Inbox rule that send a text message notification to the specified telephone number.

You can specify multiple values separated by commas.

The SentOnlyToMe parameter specifies a condition for the Inbox rule that looks for messages where the only recipient is the mailbox owner. Valid values are:

• $true: The rule action is applied to messages where the mailbox owner is the only recipient.
• $false: The condition isn't used.

The corresponding exception parameter to this condition is ExceptIfSentOnlyToMe.

The SentTo parameter specifies a condition for the Inbox rule that looks for messages with the specified recipients. You can use any value that uniquely identifies the recipient. For example:

• Name
• Alias
• Distinguished name (DN)
• Canonical DN
• Email address
• GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

The corresponding exception parameter to this condition is ExceptIfSentTo.

This parameter is available only in the cloud-based service.

{{ Fill SoftDeleteMessage Description }}

The StopProcessingRules parameter specifies an action for the Inbox rule that stops processing additional rules if the conditions of this Inbox rule are met. Valid values are:If set to $true, the StopProcessingRules parameter instructs Exchange to stop processing additional rules if the conditions of this Inbox rule are met.

• $true: Stop processing more rules.
• $false: The action isn't used (continue processing more rules after this one).

The SubjectContainsWords parameter specifies a condition for the Inbox rule that looks for the specified words or phrases in the Subject field of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding exception parameter to this condition is ExceptIfSubjectContainsWords.

The SubjectOrBodyContainsWords parameter specifies a condition for the Inbox rule that looks for the specified words or phrases in the Subject field or body of messages.

To specify multiple words or phrases, use the following syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

The maximum length of this parameter is 255 characters.

The corresponding exception parameter to this condition is ExceptIfSubjectOrBodyContainsWords.

The ValidateOnly switch tells the cmdlet to evaluate the conditions and requirements necessary to perform the operation and then reports whether the operation will succeed or fail. No changes are made when the ValidateOnly switch is used.

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

The WithImportance parameter specifies a condition for the Inbox rule that looks for messages with the specified importance level. Valid values are:

• High
• Normal
• Low

The corresponding exception parameter to this condition is ExceptIfWithImportance.

The WithinSizeRangeMaximum parameter specifies part of a condition for the Inbox rule that looks for messages that are smaller than specified maximum size.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

You need to use this parameter with the WithinSizeRangeMinimum parameter, and the value of this parameter must be greater than the value of WithinSizeRangeMinimum.

The corresponding exception parameter to this condition is ExceptIfWithinSizeRangeMaximum.

The WithinSizeRangeMinimum parameter specifies part of a condition for the Inbox rule that looks for messages that are larger than the specified minimum size.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

You need to use this parameter with the WithinSizeRangeMaximum parameter, and the value of this parameter must be less than the value of WithinSizeRangeMaximum.

The corresponding exception parameter to this condition is ExceptIfWithinSizeRangeMinimum.

The WithSensitivity parameter specifies a condition for the Inbox rule that looks for messages with the specified sensitivity level. Valid values are:

• Normal
• Personal
• Private
• CompanyConfidential

The corresponding exception parameter to this condition is ExceptIfWithSensitivity.