Get-MailDetailDlpPolicyReport
This cmdlet is available only in the cloud-based service.
Use the Get-MailDetailDlpPolicyReport cmdlet to view the details of messages that matched the conditions defined by any data loss prevention (DLP) policies. This cmdlet works on messages that were sent within the last seven days.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Get-MailDetailDlpPolicyReport
[-Action <MultiValuedProperty>]
[-Direction <MultiValuedProperty>]
[-DlpPolicy <MultiValuedProperty>]
[-Domain <MultiValuedProperty>]
[-EndDate <DateTime>]
[-EventType <MultiValuedProperty>]
[-MessageId <MultiValuedProperty>]
[-MessageTraceId <MultiValuedProperty>]
[-Page <Int32>]
[-PageSize <Int32>]
[-ProbeTag <String>]
[-RecipientAddress <MultiValuedProperty>]
[-SenderAddress <MultiValuedProperty>]
[-StartDate <DateTime>]
[-TransportRule <MultiValuedProperty>]
[<CommonParameters>] Description
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-MailDetailDlpPolicyReport -StartDate 06/13/2015 -EndDate 06/15/2015 -SenderAddress [email protected]This example retrieves the details of messages sent by [email protected] that matched the conditions defined by a DLP policy between June 13, 2015 and June 15, 2015.
Parameters
-Action
The Action parameter filters the report by the action taken on messages. To view the complete list of valid values for this parameter, run the command: Get-MailFilterListReport -SelectionTarget Actions. The action you specify must correspond to the report type. For example, you can only specify malware filter actions for malware reports.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Direction
The Direction parameter filters the results by incoming or outgoing messages. Valid values are:
- Inbound
- Outbound
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-DlpPolicy
The DlpPolicy parameter filters the report by the name of the DLP policy. You can specify multiple values separated by commas. If the value contains spaces, enclose the value in quotation marks (").
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Domain
The Domain parameter filters the results by an accepted domain in the cloud-based organization. You can specify multiple domain values separated by commas, or the value All.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-EndDate
The EndDate parameter specifies the end date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-EventType
The EventType parameter filters the report by the event type. Valid values are:
- DLPActionHits
- DLPPolicyFalsePositive
- DLPPolicyHits
- DLPPolicyOverride
- DLPRuleHits
To view the potential list of valid values for this parameter, run the command: Get-MailFilterListReport -SelectionTarget EventTypes. The event type you specify must correspond to the report. For example, you can only specify DLP event types for DLP reports.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-MessageId
The MessageId parameter filters the results by the Message-ID header field of the message. This value is also known as the Client ID. The format of the Message-ID depends on the messaging server that sent the message. The value should be unique for each message. However, not all messaging servers create values for the Message-ID in the same way. Be sure to include the full Message ID string (which may include angle brackets) and enclose the value in quotation marks (for example, "d9683b4c-127b-413a-ae2e-fa7dfb32c69d@DM3NAM06BG401.Eop-nam06.prod.protection.outlook.com").
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-MessageTraceId
The MessageTraceId parameter filters the results by the message trace ID value of the message. This GUID value is generated for every message that's processed by the system (for example, c20e0f7a-f06b-41df-fe33-08d9da155ac1).
You can specify multiple values separated by commas.
The MessageTraceId value is also available in the output of the following cmdlets:
- Get-MailDetailATPReport
- Get-MailDetailEncryptionReport
- Get-MailDetailTransportRuleReport
- Get-MessageTrace
- Get-MessageTraceDetail
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Page
The Page parameter specifies the page number of the results you want to view. Valid input for this parameter is an integer between 1 and 1000. The default value is 1.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-PageSize
The PageSize parameter specifies the maximum number of entries per page. Valid input for this parameter is an integer between 1 and 5000. The default value is 1000.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ProbeTag
This parameter is reserved for internal Microsoft use.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-RecipientAddress
The RecipientAddress parameter filters the results by the recipient's email address. You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-SenderAddress
The SenderAddress parameter filters the results by the sender's email address. You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-StartDate
The StartDate parameter specifies the start date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-TransportRule
The TransportRule parameter filters the report by the name of the transport rule. You can specify multiple values separated by commas. If the value contains spaces, enclose the value in quotation marks (").
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.