Set-CMTSStepApplyDataImage

Reference

Module:: ConfigurationManager

Configure an instance of the Apply Data Image task sequence step.

Syntax

Set-CMTSStepApplyDataImage
   [-Destination <DestinationType>]
   [-DestinationDisk <Int32>]
   [-DestinationDriveLetter <String>]
   [-DestinationPartition <Int32>]
   [-DestinationVariable <String>]
   [-ImagePackage <IResultObject>]
   [-ImagePackageIndex <Int32>]
   [-WipePartition <Boolean>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Destination <DestinationType>]
   [-DestinationDisk <Int32>]
   [-DestinationDriveLetter <String>]
   [-DestinationPartition <Int32>]
   [-DestinationVariable <String>]
   [-ImagePackage <IResultObject>]
   [-ImagePackageIndex <Int32>]
   [-WipePartition <Boolean>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Destination <DestinationType>]
   [-DestinationDisk <Int32>]
   [-DestinationDriveLetter <String>]
   [-DestinationPartition <Int32>]
   [-DestinationVariable <String>]
   [-ImagePackage <IResultObject>]
   [-ImagePackageIndex <Int32>]
   [-WipePartition <Boolean>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyDataImage
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Use this cmdlet to configure an instance of the Apply Data Image task sequence step.

For more information on this step, see About task sequence steps: Apply Data Image.

Note

Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.

Examples

Example 1

This example changes the Apply Data image step in the Custom task sequence task sequence to use a specific disk and partition.

$tsName = "Custom task sequence"
$tsStepNameApplyDataImg = "Apply data image"

Set-CMTSStepApplyDataImage -TaskSequenceName $tsName -StepName $tsStepNameApplyDataImg -Destination SpecificDiskAndPartition -DestinationDisk 5 -DestinationPartition 50

Parameters

-AddCondition

Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.

Type:	IResultObject[]
Aliases:	AddConditions
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ClearCondition

Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.

Type:	SwitchParameter
Aliases:	ClearConditions
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Condition

Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.

Type:	IResultObject[]
Aliases:	SubCondition, SubConditions
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableName

Specify the name of the task sequence variable to use as a condition.

Type:	String
Aliases:	Variable
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableValue

Specify the value of the task sequence variable to use in a condition.

Type:	String
Aliases:	Value
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

Specify an optional description for this task sequence step.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Destination

Specify the location where you want to apply this data image. If you don't specify this parameter, the default is NextAvailableFormattedPartition.

NextAvailableFormattedPartition: Use the next sequential partition not already targeted by an Apply Operating System or Apply Data Image step in this task sequence.
SpecificDiskAndPartition: Specify the disk number with the DestinationDisk parameter and the partition number with the DestinationPartition parameter.
SpecificLogicalDriverLetter: Use the DestinationDriveLetter parameter to specify the logical drive letter assigned to the partition by Windows PE. This drive letter can be different from the drive letter assigned by the newly deployed OS.
LogicalDriverLetterInVariable: Use the DestinationVariable parameter to specify the task sequence variable containing the drive letter assigned to the partition by Windows PE. This variable is typically set with the DiskNumberVariable parameter of the Set-CMTSStepPartitionDisk or New-CMTSStepPartitionDisk cmdlets for the Format and Partition Disk task sequence step.

Type:	DestinationType
Accepted values:	NextAvailableFormattedPartition, SpecificDiskAndPartition, SpecificLogicalDriverLetter, LogicalDriverLetterInVariable
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationDisk

When you use -Destination SpecificDiskAndPartition, use this parameter to specify the disk number. Specify an integer from 0 to 99. Also use the DestinationPartition parameter.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationDriveLetter

When you use -Destination SpecificLogicalDriverLetter, use this parameter to specify the logical drive letter. Specify a drive letter from C to Z.

Type:	String
Aliases:	DestinationLogicalDrive
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationPartition

When you use -Destination SpecificDiskAndPartition, use this parameter to specify the partition number. Specify an integer from 1 to 99. Also use the DestinationDisk parameter.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationVariable

When you use -Destination LogicalDriverLetterInVariable, use this parameter to specify the task sequence variable with the logical drive letter. The variable name needs to alphanumeric without spaces and fewer than 256 characters.

Type:	String
Aliases:	DestinationVariableName
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DisableWildcardHandling

This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FileDateTimeOperator

Specify a variable operator type for a file date/time condition.

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FilePath

Specify the path for a file condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FileTimestamp

Specify a date/time value to use for a file condition.

Type:	DateTime
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FileVersion

Specify a version string for a file condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderDateTimeOperator

Specify a variable operator for a folder date/time condition.

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderPath

Specify the path for a folder condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderTimestamp

Specify a date/time value to use for a folder condition.

Type:	DateTime
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ForceWildcardHandling

This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ImagePackage

Specify a data image package object. The step applies the data from this image. Use the ImagePackageIndex parameter to set the image index.

To get this object, use the Get-CMOperatingSystemImage cmdlet.

Type:	IResultObject
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ImagePackageIndex

Specify an integer value of the image index. Use this parameter with the ImagePackage parameter.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-InputObject

Specify a task sequence object that has the Apply Data Image step to configure. To get this object, use the Get-CMTaskSequence cmdlet.

Type:	IResultObject
Aliases:	TaskSequence
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-IsAnyVersion

Use this parameter with the SetConditionSoftware parameter to match any version of the product.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IsContinueOnError

Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.

Type:	Boolean
Aliases:	IsThisStepContinueOnError
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IsEnabled

Use this parameter to enable this task sequence step.

Type:	Boolean
Aliases:	IsThisStepEnabled
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-MoveToIndex

Move this step to the specified index position in the task sequence.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-MsiFilePath

Specify the path to a Windows Installer file for a software condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Namespace

Specify the namespace for a WMI query condition.

Type:	String[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-NewStepName

Use this parameter to rename this task sequence step.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-OperatorType

Specify an operator to use with a task sequence variable condition.

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Query

Specify a WMI query string to use for a condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryKey

Specify the key to use with a registry condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryOperator

Specify an operator to use with a registry condition.

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueData

Specify the value data to use with a registry condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueName

Specify the value name to use with a registry condition.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFile

Use this parameter to remove a file condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFolder

Use this parameter to remove a folder condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionIfStatement

Use this parameter to remove an if statement condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionOperatingSystem

Use this parameter to remove an OS condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionQueryWmi

Use this parameter to remove a WMI query condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionRegistry

Use this parameter to remove a registry condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionSoftware

Use this parameter to remove a software condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionVariable

Use this parameter to remove a task sequence variable condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RootKey

Specify the root key to use with a registry condition.

Type:	RegistryRootKeyType
Accepted values:	HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFile

Add a new file condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFolder

Add a new folder condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionIfStatement

Add a new if statement condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionOperatingSystem

Add a new OS condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionQueryWmi

Add a new WMI query condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionRegistry

Add a new registry condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionSoftware

Add a new software condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionVariable

Add a new task sequence variable condition.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-StatementType

Set the type for an if statement condition.

Type:	ConditionStatementType
Aliases:	Operator
Accepted values:	All, Any, None
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-StepName

Specify the name of the step to select for changes.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-StepOrder

Use this parameter to reorder the step in the task sequence.

Type:	ReorderType
Accepted values:	MoveUp, MoveDown, MoveToIndex
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-SupportedPlatform

Use this parameter to specify the platforms for an OS condition.

Type:	IResultObject[]
Aliases:	SupportedPlatforms
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceId

Specify the package ID of the task sequence with the Apply Data Image step to configure. This value is a standard package ID, for example XYZ00858.

Type:	String
Aliases:	Id, TaskSequencePackageId
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceName

Specify the name of the task sequence to target for changes.

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-ValueType

Specify the type of value for a registry condition.

Type:	RegistryValueType
Accepted values:	RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VersionOperator

Specify an operator to use with a file condition.

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet doesn't run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WipePartition

Set this parameter to $true to delete all content on the partition before applying the image.

Set this parameter to $false to not delete the prior contents of the partition. This action can be used to apply more content to a previously targeted partition.

Type:	Boolean
Aliases:	WipePartitionBeforeApplyImage
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Inputs

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

Outputs

System.Object

Share via