Manage mail users in Exchange Online

In Exchange Online organizations, mail users are similar to mail contacts. Both have external email addresses and both contain information about people outside your Exchange Online organization that can be displayed in the shared address book and other address lists. However, unlike a mail contact, a mail user has sign in credentials in your Microsoft 365 organization and can access resources. For more information about mail contacts and mail users, see Recipients in Exchange Online.

You manage mail users in the Exchange admin center (EAC) or in PowerShell (Exchange Online PowerShell in organizations with Exchange Online mailboxes).

What do you need to know before you begin?

• To open the Exchange admin center (EAC), see Exchange admin center in Exchange Online.

• To connect to Exchange Online PowerShell, see Connect to Exchange Online PowerShell. To connect to standalone Exchange Online Protection PowerShell, see Connect to Exchange Online Protection PowerShell.

• Mail users don't require licenses in Exchange Online.

• When you create mail users in Exchange Online PowerShell, you might encounter throttling. Also, the EOP PowerShell cmdlets use a batch processing method that results in a propagation delay of a few minutes before the results of the commands are visible.

• You need permissions before you can perform this procedure or procedures. To see what permissions you need, see the "Recipients" entry in the Feature permissions in Exchange Online article.

• For information about keyboard shortcuts that might apply to the procedures in this article, see Keyboard shortcuts for the Exchange admin center.

Use the Exchange admin center to manage mail users

In the EAC at https://admin.exchange.microsoft.com, go to Recipients > Contacts. Or to go directly to the Contacts page, use https://admin.exchange.microsoft.com/#/contacts.

The following information is shown on the Contacts page for each entry:

• Display name
• Email address
• Contact type: This value is MailUser for mail users.

To change the list from normal to compact spacing, select Change view, and then select Compact list.

Use the Search box and a corresponding value to find specific mail users.

To filter the list of entries on the page, select Filter, and then select one of the following values:

• All contacts
• Mail contacts
• Mail users
• Guest mail users****Groups with dynamic membership or Ownerless groups.

To clear the filter, select Clear filter.

To create a custom filter, select New filter.

In the blank area next to the Display name column, select the round check box that appears next to one or more entries, or select all entries by selecting the round check box that appears in the column heading, and then select the Export contacts action that appears on the page. Select Export contacts in current list or Export all contacts. The default filename is Contacts.csv and the default location is the Downloads folder. If a file with that name already exists, the filename is appended with a number (for example, Contacts (1).csv).

Use the EAC to create mail users

1. On the Contacts page at https://admin.exchange.microsoft.com/#/contacts, select Add a mail user to open the new mail user wizard.

2. On the Set up the basic information page, configure the following settings. Settings marked with an ^* are required.

   • First name
   • Last name
   • Initials: The person's middle initial.
   • Display name^*
   • External email address: Enter the user's email address. The domain should be external to your cloud-based organization.
   • Alias^*
   • User ID^* and Domain^*: Enter the account that the person uses to sign in to the service.
   • Password^* and Confirm password^*: Enter and reenter the account password. Verify that the password complies with the password length, complexity, and history requirements of your organization

   When you're finished on the Set up the basic information page, select Next.

3. On the Review mail user page, review the details. Select Back to make changes.

   When you're finished on the Review mail user page, select Create.

4. On the Status page, wait for the mail user creation to finish, and then select Done.

Use the EAC to modify mail users

1. On the Contacts page at https://admin.exchange.microsoft.com/#/contacts, find the mail user that you want to modify (the Contact type value is MailUser), and select the mail user by clicking on the Display name value (don't select the checkbox).

2. In the details flyout that opens, the following tabs are available:

   • General tab:
     • General information section: Select Manage general information to modify the following properties:
       • First name
       • Last name
       • Display name
       • Initials
     • Hide from global address list (GAL): Select Manage hide from GAL turn Off or turn On hiding the mail user from the GAL.
     • MailTip section: Select Manage MailTip to add a MailTip to the mail user.
   • Personal information section: The following settings are available:
     • Contact information section: Select Contact information to modify the following properties:
       • Web site
       • Fax phone
       • Home phone
       • Mobile phone
       • Work phone
       • Office
       • Street
       • City
       • State/Province
       • ZIP/Postal code
       • Country/Region
       • Notes
     • Organization information section: Select Edit organization to modify the following properties:
       • Title
       • Department
       • Company
       • Manager
       • Direct reports is available if the mail user is already designated as someone's manager.
   • Others tab:
     • Custom attributes section: Select Manage custom attributes to add text values to the Custom 1 through Custom 15 attributes.
     • Member of (group membership) section: Select Manage member of to remove the mail user from existing groups.
     • Email addresses section: Select Manage email address types to manage the proxy addresses for the mail user.
     • Message delivery restrictions section: Select Manage message delivery restrictions to change the following properties:
       • Accept messages from section:
         • Select All senders or Selected senders. If you select Selected senders, Add sender appears for you to select senders to allow.
         • Select or clear Require senders to be authenticated.
       • Block messages from section: Select None or Selected senders. If you select Selected senders, Add sender appears for you to select senders to block.

   When you're finished modifying the properties of the mail user, select Save.

Use the EAC to remove mail users

1. On the Contacts page at https://admin.exchange.microsoft.com/#/contacts, find, select, and remove the mail user using either of the following methods:

   • Select the round check box that appears in the blank area next to the Display name column, and then select the Delete action that appears on the page.
   • Click anywhere in the row other than the round check box next to the Display name column. In the details flyout that opens, select Delete contact at the top of the flyout.

2. Select Confirm in the flyout that opens.

Use Exchange Online PowerShell to manage mail users

To connect to Exchange Online PowerShell, see Connect to Exchange Online PowerShell.

Use Exchange Online PowerShell to view mail users

To return a summary list of all mail users, run the following command:

Get-MailUser -ResultSize unlimited

To view detailed information about a specific mail user, replace <MailUserIdentity> with the name, alias, or account name of the mail user, and run the following commands:

Get-MailUser -Identity <MailUserIdentity> | Format-List

Get-User -Identity <MailUserIdentity> | Format-List

For detailed syntax and parameter information, see Get-MailUser and Get-User.

Use Exchange Online PowerShell to create mail users

To create a mail user, use the following syntax:

New-MailUser -Name "<UniqueName>" -MicrosoftOnlineServicesID <Account> -Password (Read-Host "Enter password" -AsSecureString) [-Alias <AliasValue>] [-DisplayName "<Display Name>"] [-ExternalEmailAddress <ExternalEmailAddress>] [-FirstName <Text>] [-Initials <Text>] [-LastName <Text>]

This example creates a mail user for Felipe Apodaca:

• The name and display name is Felipe Apodaca (if you don't use the DisplayName parameter, the value of the Name parameter is used for the display name).
• The alias is fapodaca.
• The external email address is [email protected].
• The sign in name is [email protected].
• You're prompted to enter the password.

New-MailUser -Name "Felipe Apodaca" -Alias fapodaca -ExternalEmailAddress [email protected] -FirstName Felipe -LastName Apodaca -MicrosoftOnlineServicesID [email protected] -Password (Read-Host "Enter password" -AsSecureString)

For detailed syntax and parameter information, see New-MailUser.

Use Exchange Online PowerShell to modify mail users

To modify existing mail users, use the following syntax:

Set-MailUser -Identity <MailUserIdentity> [-Alias <Text>] [-DisplayName <Text>] [-EmailAddresses <ProxyAddressCollection>] [-MicrosoftOnlineServicesID <SmtpAddress>]

Set-User -Identity <MailUserIdentity> [-City <Text>] [-Company <Text>] [-CountryOrRegion <CountryInfo>] [-Department <Text>] [-Fax <PhoneNumber>] [-FirstName <Text>] [-HomePhone <PhoneNumber>] [-Initials <Text>] [-LastName <Text>] [-MobilePhone <PhoneNumber>] [-Notes <Text>] [-Office <Text>] [-Phone <PhoneNumber>] [-PostalCode <String>] [-StateOrProvince <String>] [-StreetAddress <Tet>] [-Title <Text>] [-WebPage <Text>]

This example sets the external email address for Pilar Pinilla.

Set-MailUser -Identity "Pilar Pinilla" -EmailAddresses [email protected]

This example sets the Company property for all mail users to Contoso.

$Recip = Get-Recipient -RecipientType MailUser -ResultSize unlimited

$Recip | foreach {Set-User -Identity $_.Alias -Company Contoso}

This example sets the CustomAttribute1 property to the value of "Contoso Employee" for all mail users where the Company property value is Contoso.

$Contoso = Get-User -ResultSize unlimited -Filter "(RecipientTypeDetails -eq 'mailuser') -and (Company -eq 'Contoso')"

$Contoso | foreach {Set-MailUser -Identity $_ -CustomAttribute1 "Contoso Employee"}

This example hides all mail users from the organization's address book:

$MEU = Get-MailUser -ResultSize unlimited

$MEU | foreach {Set-MailUser -Identity $_ -HiddenFromAddressListsEnabled $true}

Use Exchange Online PowerShell to remove mail users

To remove mail users in standalone EOP PowerShell, use the following syntax:

Remove-MailUser -Identity <MailUserIdentity>

This example removes the mail user for Jeffrey Zeng.

Remove-MailUser -Identity "Jeffrey Zeng"

For detailed syntax and parameter information, see Remove-MailUser.

How do you know these procedures worked?

To verify that you successfully created, modified, or removed mail users, do any of the following steps:

• In the EAC, go to the Recipients > Contacts and Verify the mail user is listed (or not listed). The Contact Type value is MailUser. Select the mail contact from the list by clicking anywhere in the row other than the round check box that appears in the blank area next to the Display name column to view or edit the mail user's details.

• In Exchange Online PowerShell, replace <MailUserIdentity> with the name, email address, or alias of the mail user, and run the following command to verify that the mail user is listed (or not listed).

  Get-MailUser -Identity <MailUserIdentity> | Format-List Name,Alias,DisplayName,ExternalEmailAddress
  

• In Exchange Online PowerShell, use the Get-User and Get-MailUser cmdlets to verify the property changes you made.

  Get-MailUser | Format-List Name,CustomAttribute1
  

  Get-User -ResultSize unlimited -Filter "RecipientTypeDetails -eq 'mailuser'" | Format-List Name,Company
  

Use directory synchronization to manage mail users

In Exchange Online, directory synchronization is available for hybrid customers with on-premises and cloud mailboxes, and for fully hosted Exchange Online customers who use on-premises Active Directory exclusively.

In standalone EOP, directory synchronization is available for customers with on-premises Active Directory.

• If you use directory synchronization to manage recipients, you can still add and manage users in the Microsoft 365 admin center, but they aren't synchronized with your on-premises Active Directory. Directory synchronization only syncs recipients from your on-premises Active Directory to the cloud, not the other direction.

• Using directory synchronization is recommended for use with the following features:

  • Outlook Safe Sender lists and Blocked Sender lists: For more information about how these lists affect or don't affect filtering in the service, see User allows and blocks.
  • Directory Based Edge Blocking (DBEB): For more information, see Use Directory Based Edge Blocking to reject messages sent to invalid recipients.
  • End user access to quarantine: To access their quarantined messages, recipients must have a valid user ID and password in the service. For more information, see Manage quarantined messages and files as a user.
  • Mail flow rules (also known as transport rules): When you use directory synchronization, your existing Active Directory users and groups are automatically uploaded to the cloud, so you can create mail flow rules that target specific users and/or groups without having to manually add them in the service. Dynamic distribution groups can't be synchronized via directory synchronization.

Get the necessary permissions and prepare for directory synchronization, as described in What is Microsoft Entra Connect?.

Synchronize directories with Microsoft Entra Connect

1. Activate Directory synchronization as described in Microsoft Entra Connect Sync: Understand and customize synchronization.

2. Install and configure an on-premises computer to run Microsoft Entra Connect as described in Prerequisites for Microsoft Entra Connect.

3. Select which installation type to use for Microsoft Entra Connect:

   • Express
   • Custom
   • Pass-through authentication

After configuring your sync, be sure to verify that Microsoft Entra Connect is synchronizing correctly. On the Contacts page in the EAC at https://admin.exchange.microsoft.com/#/contacts, verify that the list of users was correctly synchronized from your on-premises environment.