Encodian - PDF

The file content of the source PDF file

The filename of the file

The file content of the file

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The HTML to embed as a header or footer within the document

Set whether the HTML should be added to the header, footer of both locations.

Set whether to ignore the first page when the header / footers are added.

Set the top margin value (mm).

Set the bottom margin value (mm).

Set the right margin value (mm).

Set the left margin value (mm).

Set which pages within the PDF document to apply the HTML header or footer.

Specify the page numbers where the HTML header or footer should be applied, this property only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers where the HTML header or footer should not applied, this property only applies when the 'Apply To' property is set to 'Specific'.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The filename for the watermark image file, the file extension is mandatory: 'file.jpg' and not 'file'

The content of the watermark image file

Set whether to skip applying the watermark to the first page.

The orientation of the image to embed as a watermark within the document

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 0.7

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The filename for the watermark image file, the file extension is mandatory: 'file.jpg' and not 'file'

The content of the watermark image file

Set whether to skip applying the watermark to the first page.

Set where in the document to apply the watermark.

Specify the page numbers where the watermark should be applied, this only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers where the watermark should not applied, this property only applies when the 'Apply To' property is set to 'Specific'.

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 0.7

Set the rotation angle of the image watermark in degrees.

Set the quality of the image watermark from 1 to 100.

Set the X offset for positioning the watermark image on the page.

Set the Y offset for positioning the watermark image on the page.

Set the multiple to either reduce (less than 1.0) or increase the size of the image (greater than 1.0), for example: 1.2 is equal to 120%, and 0.7 is equal to 70%.

If set to 'true' the watermark image will be added to the background of the page.

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Set which page to start adding page number(s) from.

Set the starting number for the page number(s) added to the document.

Set the format of the page number(s) added to the document, where [PageNumber] is replaced by the current page number and [TotalPages] is replaced by the total number of pages.

Set the horizontal alignment of the page number(s) added to the document, the default value is Center.

Set a custom number format, for example '{0:00000}' would generate 00001

Set the top margin value (pt). The default value is set to 20.

Set the right margin value(pt). The default value is set to 20.

Set the bottom margin value (pt). The default value is set to 20.

Set the left margin value (pt). The default value is set to 20.

Set whether the page number(s) should be added to top or bottom layer of the PDF document. The default setting (false) adds the page number(s) to the top layer.

Set the HTML colour of the font, the default colour is set to #000000.

Set the size of the font, the default size is set to 14.

Set the opacity of the page number(s), valid values range from 0.0+ to 1.0, the default value is 1.0

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The text to embed as a watermark within the document

Set whether to skip applying the watermark to the first page.

The orientation of the text to embed as a watermark within the document

The font applied to the text watermark, the default font is set to Arial.

The HTML colour applied to the text watermark, the default colour is set to #E81123.

The size of the font applied to the text watermark, the default size is set to 34.

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 1.0

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The text to embed as a watermark within the document. Add carriage return control characters (backslash r) to manually split text onto new lines.

Set whether to skip applying the watermark to the first page.

Set where in the document to apply the watermark.

Specify the page numbers where the watermark should be applied, this proporty only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers where the watermark should not applied, this property only applies when the 'Apply To' property is set to 'Specific'.

The font applied to the text watermark, the default font is set to Arial.

The HTML colour applied to the text watermark, the default colour is set to #E81123.

The size of the font applied to the text watermark, the default size is set to 34.

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 1.0

The encoding type to apply to the text watermark.

Set the horizontal alignment of the watermark, the default value is Center.

Set the vertical alignment of the watermark, the default value is Center.

Set the text alignment of the watermark, the default value is Center.

Set the rotation angle of the text watermark.

Set whether the text watermark should automatically wrap.

Set the row width applied when the watermark is set to automatically wrap.

Set the whether the text should be automatically sized to fit the width of the container.

Set the width of the watermark container when automatic scaling is enabled.

Set the height of the watermark container when automatic scaling is enabled.

Set whether the watermark should be added to the top or bottom layer. If 'True' the watermark is added to the bottom layer.

Set the vertical watermark indent, starting from the bottom and overriding the VerticalAlignment property.

Set the horizontal watermark indent, starting from the left and overriding the HorizontalAlignment property.

Set whether the text watermark should be added as text or an image.

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Select the language used for OCR processing

Select the OCR processing type, the 'Fast' option reduces processing time with possible minor loss of OCR accuracy - https://support.encodian.com/hc/en-gb/articles/360012686653-OCR-a-PDF-Document

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Perform document clean-up operations, the default option will auto rotate, auto deskew and auto despeckle the document.

Automatically detects orientation and rotates it so that the text on it is upright oriented

Sets the minimum confidence percentage (0 to 100) used to control whether the rotation is applied, the default value is 60.

Detects the skew angle and rotates to remove that skew.

Automatically detects speckles and removes them.

This action analyzes a document and automatically adjusts brightness and contrast based on the analysis.

Locates border pixels and removes the pixels from the document,this is disabled by default.

This works only on color and grayscale documents. This operation smoothes background colors to eliminate or de-emphasize noise.

This only works on bitonal documents, it looks at groups of pixels, and finds isolated bumps and pits in the edges of those objects, and fills them in.

This action will remove shaded regions from bitonal documents.

Image Detergent works by changing pixels of similar color values to a central color value, which has the result of smoothing the image wherever regions of those colors appear.

Performs a 3x3 Average filter smoothing operation on the document, placing the output in the center of the window.

Detects and removes hole punch marks from a bitonal document.

Computes all necessary parameters by analyzing the input data before actually performing the binarization. The algorithm is tuned to typical document images, consisting of dark text on brighter background. It is robust to shadows, noise and background images.

Set whether blank pages should be removed from the PDF document.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source PDF file

Contained images will be compressed, aligned to the value of the 'Image Quality' property

Sets the quality for compressed images: 1 > 100

Specifies the maximum resolution of images (dpi), if the image has a higher resolution it will be scaled dynamically.

If 'Compress Images' and 'Resize Images' are enabled, images will be resized where the image resolution is greater than the specified 'Max Resolution' property.

Remove private information from the PDF document, i.e. page piece information.

Remove all unused objects (i.e. objects which do not have a reference) are removed from PDF document.

Remove all unused resources from the PDF document.

Link duplicate streams and store them as a single object. This can decrease document size in some cases (for example, where the same document was merged multiple times).

Page contents will be reused when the PDF document is optimized for equal pages.

Remove all embedded fonts. The document size will decrease but the document may become unreadable if the correct font is not installed on the user's machine.

Flatten all annotations contained within the PDF document.

Delete all annotations contained within the PDF document.

Flatten all fields contained within the PDF document (AcroForms only).

The file content of the source PDF file

Set the page number to begin deleting pages from

Set the page number to stop deleting pages on. The default value is set to the last page of the PDF document provided

A comma separated list of page numbers of the pages to delete: 1,3,4

The file content of the source PDF file

The file content of the source PDF file

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The name assigned to the extracted image

The number of points from the left edge of the page to the lower left corner of the rectangle image region

The number of points from the bottom edge of the page to the lower left corner of the rectangle image region

The number of points from the left edge of the page to the upper right corner of the rectangle image region

The number of points from the bottom edge of the page to the upper right corner of the rectangle image region

The number of the page to extract the image from

Extract the specified page as an image, ignoring and specificed coodinates

The resolution of the extracted image

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The file content of the source PDF file

Set the page number to begin extracting pages from

Set the page number to stop extracting pages on. The default value is set to the last page of the PDF document provided

A comma separated list of page numbers of the pages to extract: 1,3,4

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Sets the page number to begin text layer extraction from.

Sets the page number to end text layer extraction from. The default value is set to the last page of the PDF document provided.

The encoding type used for text extraction.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The name assigned to the text region

The number of points from the left edge of the page to the lower left corner of the rectangle text region

The number of points from the bottom edge of the page to the lower left corner of the rectangle text region

The number of points from the left edge of the page to the upper right corner of the rectangle text region

The number of points from the bottom edge of the page to the upper right corner of the rectangle text region

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source PDF file

The JSON data to populate with the PDF Form with.

The file content of the source PDF file

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The HTML which will be inserted into the PDF document

Set where within the PDF provided, the HTML data should be inserted, the default value is Prepend.

Set a specific page location to insert the HTML data into.

Set page oprientation (Landscape or portrait).

Set the page size for the output PDF document, A4 is the default size.

Set the viewport used to render the HTML.

Set the top margin value (mm)

Set the bottom margin value (mm)

Set the right margin value (mm)

Set the left margin value (mm)

Set whether the data provided in the HTML Data field should be decoded.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the output PDF document

The filename of the file

The file content of the file

Set MS Office document comments and tracked changes removal option

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the output PDF document

The filename of the 1st source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the source file

The filename of the 2nd source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 2nd source file

The filename of the 3rd source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 3rd source file

The filename of the 4th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 4th source file

The filename of the 5th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 5th source file

The filename of the 6th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 6th source file

The filename of the 7th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 7th source file

The filename of the 8th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 8th source file

The filename of the 9th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 9th source file

The filename of the 10th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 10th source file

Set MS Office document comments and tracked changes removal option

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The text to search for and apply the specified redaction to.

Specify a regular expression to seek matching text and apply the specified redaction to.

The redaction colour to apply to the redaction, the default value is #000000 (Black)

Set whether to ignore the first page .

Set which pages within the document to redact

Specify the page numbers to apply redaction to, this property only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers not to apply redaction to, this property only applies when the 'Apply To' property is set to 'Specific'.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Identifiers of the watermark(s) to remove. Multiple identifiers should be provided comma separated

Set the type of watermark to remove from the PDF document provided

The file content of the source PDF file

The file content of the source file

The text to locate and replace with the specified image

The content of the image file

Set whether to ignore the first page when searching for the text fragment

Set which pages within the document to search for the text fragment

Specify the page numbers to search for the text fragment, this property only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers not to search for the text fragment, this property only applies when the 'Apply To' property is set to 'Specific'.

The file content of the source PDF file

Set the new page size to be applied to the PDF file provided

Set the page number to begin resizing from

Set the page number to end resizing on

Set a custom width, only applied when the 'Custom' page size has been set

Set a custom height, only applied when the 'Custom' page size has been set

Set bottom padding of the PDF document by percentage (default is 0%)

Set top padding of the PDF document by percentage (default is 0%)

Set left padding of the PDF document by percentage (default is 0%)

Set right padding of the PDF document by percentage (default is 0%)

The file content of the source PDF file

Set the angle of the page rotation: 90, 180, 270, 360

Set the page number to begin rotating pages from

Set the page number to stop rotating pages on. The default value is set to the last page of the PDF document provided

A comma separated list of page numbers of the pages to rotate: 1,3,4

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Protect view access to the document

Protect edit access to the document

Set the privileges assigned to the PDF document

Set the cryptographic algorithm

Set whether document assembly is permitted

Set whether copy is permitted

Set whether 'Fill in forms' is permitted

Set whether print is permitted

Set whether screen reading is permitted

Set whether document content modification is permitted

Set whether annotation modification is permitted

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Set the privileges assigned to the PDF document

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Set the certificate type

Request object, refer to schema definition: DtoSignPdf

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the PDF file

Select how to split the file

Provide a split configuration

Append the bookmark name value to the filename when splitting by 'BookmarkLevel'

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the PDF file

Optional - Specify a value for detecting a specific barcode(s)

Select a split configuration

Select a split action, whether to split before, after or remove the page containing the split value.

Set the confidence level for barcode detection

Optional - Specify whether the value for each barcode found is appended to the start of the filename

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the PDF file

Provide the split value used to perform the split operation

Set whether the 'Split Value' value should be evaluted as a regular expression, the default value is 'false'

Set whether the expression value should be used within the output filename.

Select a split configuration

Select a split action, whether to split before, after or remove the page containing the split value.

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The password to use to unlock the PDF Document

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source PDF file

Set whether each page should be checked for the presence of a text layer or the document as a single entity