Configure a cloud trust between on premises AD DS and Microsoft Entra ID for accessing Azure Files

Many organizations want to use identity-based authentication for SMB Azure file shares in environments that span both on-premises Active Directory Domain Services (AD DS) and Microsoft Entra ID (formerly Azure Active Directory), but don't meet the necessary operating system or domain prerequisites.

In such scenarios, customers can enable Microsoft Entra Kerberos authentication for hybrid user identities and then establish a cloud trust between their on-premises AD DS and Microsoft Entra ID to access SMB file shares using their on-premises credentials. This article explains how a cloud trust works, and provides instructions for setup and validation. It also includes steps to rotate a Kerberos key for your service account in Microsoft Entra ID and Trusted Domain Object, and steps to remove a Trusted Domain Object and all Kerberos settings, if desired.

This article focuses on authenticating hybrid user identities, which are on-premises AD DS identities that are synced to Microsoft Entra ID using either Microsoft Entra Connect or Microsoft Entra Connect cloud sync. Cloud-only identities aren't currently supported for Azure Files.

Applies to

File share type	SMB	NFS
Standard file shares (GPv2), LRS/ZRS
Standard file shares (GPv2), GRS/GZRS
Premium file shares (FileStorage), LRS/ZRS

Scenarios

The following are examples of scenarios in which you might want to configure a cloud trust:

• You have a traditional on premises AD DS, but you're not able to use it for authentication because you don't have unimpeded network connectivity to the domain controllers.

• You've started migrating to the cloud but currently have applications still running on traditional on-premises AD DS.

• Some or all of your client machines don't meet the operating system requirements for Microsoft Entra Kerberos authentication.

Permissions

To complete the steps outlined in this article, you'll need:

• An on-premises Active Directory administrator username and password
• Microsoft Entra Global Administrator account username and password

Prerequisites

Before implementing the incoming trust-based authentication flow, ensure that the following prerequisites are met:

Enable Microsoft Entra Kerberos authentication

If you've already enabled Microsoft Entra Kerberos authentication on your storage account, you can skip this step and proceed to Create and configure the Microsoft Entra Kerberos Trusted Domain Object.

You can enable Microsoft Entra Kerberos authentication on Azure Files for hybrid user accounts using the Azure portal, PowerShell, or Azure CLI.

Set-AzStorageAccount -ResourceGroupName <resourceGroupName> -StorageAccountName <storageAccountName> -EnableAzureActiveDirectoryKerberosForFile $true

$domainInformation = Get-ADDomain
$domainGuid = $domainInformation.ObjectGUID.ToString()
$domainName = $domainInformation.DnsRoot

Set-AzStorageAccount -ResourceGroupName <resourceGroupName> -StorageAccountName <storageAccountName> -EnableAzureActiveDirectoryKerberosForFile $true -ActiveDirectoryDomainName $domainName -ActiveDirectoryDomainGuid $domainGuid

az storage account update --name <storageaccountname> --resource-group <resourcegroupname> --enable-files-aadkerb true

$domainInformation = Get-ADDomain
$domainGuid = $domainInformation.ObjectGUID.ToString()
$domainName = $domainInformation.DnsRoot

az storage account update --name <storageAccountName> --resource-group <resourceGroupName> --enable-files-aadkerb true --domain-name <domainName> --domain-guid <domainGuid>

Grant admin consent to the new service principal

After enabling Microsoft Entra Kerberos authentication, you'll need to explicitly grant admin consent to the new Microsoft Entra application registered in your Microsoft Entra tenant. This service principal is auto-generated and isn't used for authorization to the file share, so don't make any edits to the service principal other than those documented here. If you do, you might get an error.

You can configure the API permissions from the Azure portal by following these steps:

1. Open Microsoft Entra ID.
2. In the service menu, under Manage, select App registrations.
3. Select All Applications.
4. Select the application with the name matching [Storage Account] <your-storage-account-name>.file.core.windows.net.
5. In the service menu, under Manage, select API permissions.
6. Select Grant admin consent for [Directory Name] to grant consent for the three requested API permissions (openid, profile, and User.Read) for all accounts in the directory.
7. Select Yes to confirm.

Disable multifactor authentication on the storage account

Microsoft Entra Kerberos doesn't support using MFA to access Azure file shares configured with Microsoft Entra Kerberos. You must exclude the Microsoft Entra app representing your storage account from your MFA conditional access policies if they apply to all apps.

The storage account app should have the same name as the storage account in the conditional access exclusion list. When searching for the storage account app in the conditional access exclusion list, search for: [Storage Account] <your-storage-account-name>.file.core.windows.net

Remember to replace <your-storage-account-name> with the proper value.

For guidance on disabling MFA, see the following:

• Add exclusions for service principals of Azure resources
• Create a conditional access policy

Assign share-level permissions

When you enable identity-based access, for each share you must assign which users and groups have access to that particular share. Once a user or group is allowed access to a share, Windows ACLs (also called NTFS permissions) on individual files and directories take over. This allows for fine-grained control over permissions, similar to an SMB share on a Windows server.

To set share-level permissions, follow the instructions in Assign share-level permissions to an identity.

Configure directory and file-level permissions

Once share-level permissions are in place, you can assign directory/file-level permissions to the user or group. This requires using a device with unimpeded network connectivity to an on-premises AD.

To configure directory and file-level permissions, follow the instructions in Configure directory and file-level permissions over SMB.

Create and configure the Microsoft Entra Kerberos Trusted Domain Object

To create and configure the Microsoft Entra Kerberos Trusted Domain Object, you'll use the Azure AD Hybrid Authentication Management PowerShell module. This module enables hybrid identity organizations to use modern credentials for their applications and enables Microsoft Entra ID to become the trusted source for both cloud and on-premises authentication.

Set up the Trusted Domain Object

You'll use the Azure AD Hybrid Authentication Management PowerShell module to set up a Trusted Domain Object in the on-premises AD domain and register trust information with Microsoft Entra ID. This creates an in-bound trust relationship into the on-premises AD, which enables Microsoft Entra ID to trust on-premises AD.

You only have to set up the Trusted Domain Object once per domain. If you've already done this for your domain, you can skip this section and proceed to Configure the clients to retrieve Kerberos tickets.

Install the Azure AD Hybrid Authentication Management PowerShell module

1. Start a Windows PowerShell session with the Run as administrator option.

2. Install the Azure AD Hybrid Authentication Management PowerShell module using the following script. The script:

   • Enables TLS 1.2 for communication.
   • Installs the NuGet package provider.
   • Registers the PSGallery repository.
   • Installs the PowerShellGet module.
   • Installs the Azure AD Hybrid Authentication Management PowerShell module.
     • The Azure AD Hybrid Authentication Management PowerShell uses the AzureADPreview module, which provides advanced Microsoft Entra management features.
     • To protect against unnecessary installation conflicts with the Azure AD PowerShell module, this command includes the -AllowClobber option flag.

[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12

Install-PackageProvider -Name NuGet -Force

if (@(Get-PSRepository | ? {$_.Name -eq "PSGallery"}).Count -eq 0){
    Register-PSRepository -DefaultSet-PSRepository -Name "PSGallery" -InstallationPolicy Trusted
}

Install-Module -Name PowerShellGet -Force

Install-Module -Name AzureADHybridAuthenticationManagement -AllowClobber

Create the Trusted Domain Object

1. Start a Windows PowerShell session with the Run as administrator option.

2. Set the common parameters. Customize the script below prior to running it.

   • Set the $domain parameter to your on-premises Active Directory domain name.
   • When prompted by Get-Credential, enter an on-premises Active Directory administrator username and password.
   • Set the $cloudUserName parameter to the username of a Global Administrator privileged account for Microsoft Entra cloud access.

   Note

   If you wish to use your current Windows login account for your on-premises Active Directory access, you can skip the step where credentials are assigned to the $domainCred parameter. If you take this approach, don't include the -DomainCredential parameter in the PowerShell commands following this step.

   $domain = "your on-premesis domain name, for example contoso.com"
   
   $domainCred = Get-Credential
   
   $cloudUserName = "Azure AD user principal name, for example [email protected]"
   

3. Check the current Kerberos Domain Settings.

   Run the following command to check your domain's current Kerberos settings:

   Get-AzureAdKerberosServer -Domain $domain `
       -DomainCredential $domainCred `
       -UserPrincipalName $cloudUserName
   

   If this is the first time calling any Microsoft Entra Kerberos command, you're prompted for Microsoft Entra cloud access.

   • Enter the password for your Microsoft Entra Global Administrator account.
   • If your organization uses other modern authentication methods such as Microsoft Entra multifactor authentication or Smart Card, follow the instructions as requested for sign in.

   If this is the first time you're configuring Microsoft Entra Kerberos settings, the Get-AzureAdKerberosServer cmdlet displays empty information, as in the following sample output:

   ID                  :
   UserAccount         :
   ComputerAccount     :
   DisplayName         :
   DomainDnsName       :
   KeyVersion          :
   KeyUpdatedOn        :
   KeyUpdatedFrom      :
   CloudDisplayName    :
   CloudDomainDnsName  :
   CloudId             :
   CloudKeyVersion     :
   CloudKeyUpdatedOn   :
   CloudTrustDisplay   :
   

   If your domain already supports FIDO authentication, the Get-AzureAdKerberosServer cmdlet displays Microsoft Entra service account information, as in the following sample output. The CloudTrustDisplay field returns an empty value.

   ID                  : XXXXX
   UserAccount         : CN=krbtgt-AzureAD, CN=Users, DC=contoso, DC=com
   ComputerAccount     : CN=AzureADKerberos, OU=Domain Controllers, DC=contoso, DC=com
   DisplayName         : XXXXXX_XXXXX
   DomainDnsName       : contoso.com
   KeyVersion          : 53325
   KeyUpdatedOn        : 2/24/2024 9:03:15 AM
   KeyUpdatedFrom      : ds-aad-auth-dem.contoso.com
   CloudDisplayName    : XXXXXX_XXXXX
   CloudDomainDnsName  : contoso.com
   CloudId             : XXXXX
   CloudKeyVersion     : 53325
   CloudKeyUpdatedOn   : 2/24/2024 9:03:15 AM
   CloudTrustDisplay   :
   

4. Add the Trusted Domain Object.

   Run the Set-AzureAdKerberosServer PowerShell cmdlet to add the Trusted Domain Object. Be sure to include -SetupCloudTrust parameter. If there's no Microsoft Entra service account, this command creates a new Microsoft Entra service account. This command will only create the requested Trusted Domain object if there's a Microsoft Entra service account.

   Set-AzureADKerberosServer -Domain $domain -UserPrincipalName $cloudUserName -DomainCredential $domainCred -SetupCloudTrust
   

   Note

   On a multiple domain forest, to avoid the error LsaCreateTrustedDomainEx 0x549 when running the command on a child domain:

   1. Run the command on root domain (include -SetupCloudTrust parameter).
   2. Run the same command on the child domain without the -SetupCloudTrust parameter.

   After creating the Trusted Domain Object, you can check the updated Kerberos Settings using the Get-AzureAdKerberosServer PowerShell cmdlet, as shown in the previous step. If the Set-AzureAdKerberosServer cmdlet has been run successfully with the -SetupCloudTrust parameter, the CloudTrustDisplay field should now return Microsoft.AzureAD.Kdc.Service.TrustDisplay, as in the following sample output:

   ID                  : XXXXX
   UserAccount         : CN=krbtgt-AzureAD, CN=Users, DC=contoso, DC=com
   ComputerAccount     : CN=AzureADKerberos, OU=Domain Controllers, DC=contoso, DC=com
   DisplayName         : XXXXXX_XXXXX
   DomainDnsName       : contoso.com
   KeyVersion          : 53325
   KeyUpdatedOn        : 2/24/2024 9:03:15 AM
   KeyUpdatedFrom      : ds-aad-auth-dem.contoso.com
   CloudDisplayName    : XXXXXX_XXXXX
   CloudDomainDnsName  : contoso.com
   CloudId             : XXXXX
   CloudKeyVersion     : 53325
   CloudKeyUpdatedOn   : 2/24/2024 9:03:15 AM
   CloudTrustDisplay   : Microsoft.AzureAD.Kdc.Service.TrustDisplay
   

   Note

   Azure sovereign clouds require setting the TopLevelNames property, which is set to windows.net by default. Azure sovereign cloud deployments of SQL Managed Instance use a different top-level domain name, such as usgovcloudapi.net for Azure US Government. Set your Trusted Domain Object to that top-level domain name using the following PowerShell command: Set-AzureADKerberosServer -Domain $domain -DomainCredential $domainCred -CloudCredential $cloudCred -SetupCloudTrust -TopLevelNames "usgovcloudapi.net,windows.net". You can verify the setting with the following PowerShell command: Get-AzureAdKerberosServer -Domain $domain -DomainCredential $domainCred -UserPrincipalName $cloudUserName | Select-Object -ExpandProperty CloudTrustDisplay.

Configure the clients to retrieve Kerberos tickets

Identify your Microsoft Entra tenant ID and use Group Policy to configure the client machine(s) you want to mount/use Azure File shares from. You must do this on every client on which Azure Files will be used.

Configure this group policy on the client(s) to "Enabled": Administrative Templates\System\Kerberos\Allow retrieving the Azure AD Kerberos Ticket Granting Ticket during logon

1. Deploy the following Group Policy setting to client machines using the incoming trust-based flow:

   1. Edit the Administrative Templates\System\Kerberos\Specify KDC proxy servers for Kerberos clients policy setting.

   2. Select Enabled.

   3. Under Options, select Show.... This opens the Show Contents dialog box.

      

   4. Define the KDC proxy servers settings using mappings as follows. Substitute your Microsoft Entra tenant ID for the your_Azure_AD_tenant_id placeholder. Note the space following https and before the closing / in the value mapping.

      Value name	Value
      KERBEROS.MICROSOFTONLINE.COM	<https login.microsoftonline.com:443:your_Azure_AD_tenant_id/kerberos />

      

   5. Select OK to close the 'Show Contents' dialog box.

   6. Select Apply on the 'Specify KDC proxy servers for Kerberos clients' dialog box.

Rotate the Kerberos Key

You may periodically rotate the Kerberos Key for the created Microsoft Entra service account and Trusted Domain Object for management purposes.

Set-AzureAdKerberosServer -Domain $domain `
   -DomainCredential $domainCred `
   -UserPrincipalName $cloudUserName -SetupCloudTrust `
   -RotateServerKey

Once the key is rotated, it takes several hours to propagate the changed key between the Kerberos KDC servers. Due to this key distribution timing, you can rotate the key once within 24 hours. If you need to rotate the key again within 24 hours for any reason, for example, just after creating the Trusted Domain Object, you can add the -Force parameter:

Set-AzureAdKerberosServer -Domain $domain `
   -DomainCredential $domainCred `
   -UserPrincipalName $cloudUserName -SetupCloudTrust `
   -RotateServerKey -Force

Remove the Trusted Domain Object

You can remove the added Trusted Domain Object using the following command:

Remove-AzureADKerberosServerTrustedDomainObject -Domain $domain `
   -DomainCredential $domainCred `
   -UserPrincipalName $cloudUserName

This command will only remove the Trusted Domain Object. If your domain supports FIDO authentication, you can remove the Trusted Domain Object while maintaining the Microsoft Entra service account required for the FIDO authentication service.

Remove all Kerberos Settings

You can remove both the Microsoft Entra service account and the Trusted Domain Object using the following command:

Remove-AzureAdKerberosServer -Domain $domain `
   -DomainCredential $domainCred `
   -UserPrincipalName $cloudUserName

Next step

• Mount an Azure file share