Enable quick restarts with Kernel Soft Reboot

Applies to: Azure Local, version 22H2

New in Azure Stack HCI, version 21H2, Kernel Soft Reboot (KSR) is a premium feature available on all Azure Stack HCI integrated systems. You can use it when updating the cluster to reboot the servers faster than a normal reboot. This topic explains when to use a KSR over a normal reboot and provides instructions on using this feature on Azure Stack HCI.

Why use Kernel Soft Reboot?

Traditionally, servicing a cluster (for example, applying software updates) requires putting each server in maintenance node, evacuating the server, installing updates, rebooting if necessary, and then repeating the process for every server in the cluster. Even though Cluster-Aware Updating (CAU) automates many of these tasks, when the cluster resumes, any new data written while under maintenance mode still needs to be resynced. The longer it takes to reboot a server, the more data must be resynced, and the longer the overall cluster update time.

Kernel Soft Reboot improves reboot performance by streamlining the operating system flow, minimizing the amount of data to be resynced and therefore reducing the overall cluster update time. The amount of time saved will be proportional to the memory and size of the server. As server resources such as available memory and drives increase, so does the time savings.

Take a few minutes to watch the video comparing the performance of a normal reboot to a Kernel Soft Reboot on an idle server.

When to use Kernel Soft Reboot

As this feature bypasses the lengthy and traditional reboot BIOS/FIRMWARE initialization, you can only use Kernel Soft Reboot for updates that do not require a firmware/BIOS initialization. Currently, you can use Kernel Soft Reboot optionally with the Cluster-Aware Updating WindowsUpdate plugin for Quality Updates and Hotfix plugin for MSI/MSU/EXEs files only.

Enable Kernel Soft Reboot with Cluster-Aware Updating using PowerShell

In Azure Stack HCI, version 21H2, you can use PowerShell to set up and manage Kernel Soft Reboot for your Azure Stack HCI cluster.

Option 1: Enable Kernel Soft Reboot for all future CAU runs

Set the cluster private property with key CauEnableSoftReboot to value 1 if you want CAU to set Kernel Soft Reboot as the default reboot option for all supported updates.

Get-Cluster | Set-ClusterParameter -Name CauEnableSoftReboot -Value 1 -Create 

Option 2: Use Kernel Soft Reboot with individual CAU runs

To use Kernel Soft Reboot with a specific Cluster-Aware Updating run, use the optional AttemptSoftReboot parameter when using CAU PowerShell cmdlets, such as in the following examples.

Invoke-CauRun <other_options> -AttemptSoftReboot

Add-CauClusterRole <other_options> -AttemptSoftReboot

Set-CauClusterRole <other_options> -AttemptSoftReboot

Skip Kernel Soft Reboot on certain servers

Ideally, all the servers in an Azure Stack HCI cluster should support Kernel Soft Reboot. However, you can set a registry setting on a server to make it opt out of using KSR.

Setting this registry value on any server in the cluster will cause Cluster-Aware Updating to skip Kernel Soft Reboot and attempt to reboot the server normally.

Key: SOFTWARE\Microsoft\Windows\CurrentVersion\ClusterAwareUpdating
Name: CauBypassSoftBootOnNode
Type: REG_SZ
Value: True

Disable Kernel Soft Reboot for an update run

If you're installing operating system or hardware updates with Windows Admin Center on a cluster that has Kernel Soft Reboot enabled, you'll see a Disable Kernel Soft Reboot for this run checkbox. Checking the box disables Kernel Soft Reboot only for that particular updating run. This makes it possible to leave Kernel Soft Reboot enabled on a cluster, but disable it when an updating run requires a full reboot, such as BIOS updates.

Troubleshooting

To determine the type of reboot that was last performed, use Get-CauReport with last and detailed parameters to get the report for the last Cluster-Aware Updating run.

$report = Get-CauReport <other_options> -Last -Detailed
$report.ClusterResult.NodeResults | fl Node,NodeRebootResult

The report should return a NodeResults list that contains the NodeRebootResult for each server in the cluster. The output should look something like this:

Node : VM01
NodeRebootResult : RebootSummaryResult : Succeeded
BootType : SoftBoot
SoftBootStatus : Enabled

The following table shows how each name-value pair provides more information on the last reboot for each server in the cluster.

For additional troubleshooting, see Save-CauDebugTrace.

FAQ

This section answers frequently asked questions about Kernel Soft Reboot on Azure Stack HCI, version 21H2.

Can I use Kernel Soft Reboot with Windows Server?

• No. Kernel Soft Reboot is only available in Azure Stack HCI, version 21H2 and may only work on those validated as Integrated Systems.

How can I tell if my hardware supports Kernel Soft Reboot?

• All hardware marked as Integrated Systems in the Azure Stack HCI Catalog can perform Kernel Soft Reboot.

Will Kernel Soft Reboot work with Validated Nodes?

• Although this feature is not blocked on other HCI hardware, Validated Nodes are not required to test or support Kernel Soft Reboot. If you're using a Validated Node, you can try using Kernel Soft Reboot using the instructions in this article.

Next steps

For more information, see also:

• Update Azure Stack HCI clusters
• Cluster-Aware Updating PowerShell commands
• Cluster-Aware Updating requirements and best practices