IKEv2 Idle time-out default value on windows 10 ?

Question

_{Thursday, February 28, 2019 1:47 PM}

Hello,

I would like to know what is the IKEv2 Idle time-out default value on windows 10 and where to find this information.

Best Regards

All replies (6)

_{Friday, March 1, 2019 3:16 AM}

Hi,

Unfortunately I didn’t find relevant build-in properties in Windows for IKEv2.

However, you can configure the Idle time-out of IKEv2 on RRAS.

Best regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]

_{Friday, March 1, 2019 9:57 AM}

Hello,

Thanks for this response. However I do not use IKEv2 on RRAS. I use IKEV2 directly on Windows

So I need to know what is the IKEv2 Idle time-out default value on windows 10.

Best Regards

_{Friday, March 1, 2019 3:31 PM}

Hi

In the older builds the default value was set to 60 seconds but later in the latest builds this  limit is removed due to fact that IKEv2 connections use to drop once it reaches the idle time-out limit.

Do you have any issues with the IKEv2 connections drops ?

Regards, NSeth

_{Monday, March 4, 2019 7:49 AM}

Hello,

Do you mean that nothing happens on windows 10 side in case of Idle situation (the IKE V2 connection is kept opened forever ?)

In my point of view the IKE V2 connection should be closed after some time. So  a default value on IKEv2 Idle time-out should exist. 

I want to precise that I am using IKE V2 through Windows 10 firewall Security rules

Regards

_{Monday, March 4, 2019 8:18 AM}

Hi,

Please check the photo below:

Best regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]

_{Tuesday, March 5, 2019 8:00 AM}

Hi,

Just checking in to see if the information provided was helpful.

Please let us know if you would like further assistance.

Best Regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]