Share via

IPEnableRouter - routing/forwarding not working on WIN7 / WIN10 PRO

Question

Monday, August 6, 2018 10:07 AM

Hi

I have two networks:

A: 192.168.38.0/24

B: 192.168.100.0/24

On router machine:

WIN7/10 PRO

IPEnableRouter > 1

Routing Service enabled and started

2 NICs:

192.168.38.5 for A network (This have connection to internet, default gateway 192.168.38.1)

192.168.100.1 for B network

On all clients in both networks A or B I can ping all NICs on router machine, but clients from one network to another  no.

WHY?

Thanks for help replyes

All replies (5)

Tuesday, August 7, 2018 8:15 AM

Hi,

Thanks for your question.

you should set the value of IPEnableRouter as 1. 

Check the Services: Enable the service **Routing and Remote Access.   **

Please refer to the link below:

https://www.wikihow.com/Enable-IP-Routing 

Best regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]

Tuesday, August 7, 2018 10:15 AM

Thanks for reply but You probably not read my first post because everything that you wrote I have set up and I wrote it to the post. I search for tutorials and help on internet, but all I tested not helped me.

Wednesday, August 8, 2018 7:21 AM

Hi,

Thanks for your reply.

  • check the configuration of the gateway of all clients in network.
  • When I did the test, IP forwarding will only work after rebooting the computer. So don’t forget to do it.
  • Use Wireshark to check whether the outgoing packets are actually being forwarded from network A to B. 

Best regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]

Friday, August 10, 2018 1:15 AM

Hi,

Was your issue resolved?

If you resolved it using our solution, please "mark it as answer" to help other community members find the helpful reply quickly.

If you resolve it using your own solution, please share your experience and solution here. It will be very beneficial for other community members who have similar questions.

If no, please reply and tell us the current situation in order to provide further help.

Best Regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]

Thursday, August 23, 2018 6:43 AM

Hi,

Was your issue resolved?

If you resolved it using our solution, please "mark it as answer" to help other community members find the helpful reply quickly.

If you resolve it using your own solution, please share your experience and solution here. It will be very beneficial for other community members who have similar questions.

If no, please reply and tell us the current situation in order to provide further help.

Best Regards,

Travis

Please remember to mark the replies as an answers if they help.
If you have feedback for TechNet Subscriber Support, contact [email protected]